Nếu Stihl MS của bạn 170 sẽ không bắt đầu, kiểm tra xem có đủ nhiên liệu trong bình không. You might have heard that chainsaws are hazardous to use. You might have even heard what happens if you get cut by one. Stihl MS 170 is a popular chainsaw that you can use for cutting logs, firewood or even trimming branches. But how do you use it? Trong bài viết này, we will show you how to start your Stihl MS 170 and what to do if it won’t start.
How to assemble Stihl MS 170?
If you’re having trouble starting your Stihl MS 170, đừng lo lắng - bạn không đơn độc. Many people have difficulty getting their MS 170s started, but it’s usually not a big problem. There are a few things you can do to make sure your MS 170 starts easily every time.
- Ngày thứ nhất, make sure you’re using the right fuel. Các STIHL MS 170 uses a special mixture of oil and gas, so be sure to use the correct fuel for your saw. If you’re not sure what kind of fuel to use, ask at your local hardware store or consult the Stihl website.
- Thứ hai, kiểm tra bộ lọc không khí. A dirty air filter can restrict air flow and make it harder for the engine to start. Clean or replace the air filter if necessary.
- Ngày thứ ba, make sure the spark plug is clean and in good condition. A dirty or damaged spark plug can prevent the engine from starting. Clean or replace the spark plug if necessary.Fourth, check the cưa máy Stihl tốt nhất‘s carburetor. The carburetor regulates the mixture of air and fuel that goes into the engine.
If the carburetor is Adjusting the carburetor properly set, it can make starting. Before starting any work on the saw, make sure that you have read the instruction manual. The first thing that you need to do is to gather all of the necessary tools and parts. Tiếp theo, you will need to attach the bar to the saw. Make sure that the bar is properly secured before moving on.
After the bar is attached, you can now start adding oil to the chain. Once the chain is properly lubricated, you can now start the saw. If there is not enough fuel, add more until the tank is full.You should also check the air filter to see if it needs to be replaced. A dirty air filter can prevent the saw from starting.If you have followed all of these steps and the saw still won’t start, take it to a qualified technician for further diagnosis.
How to use stihl ms 170 máy cưa?
MS 170 là một ánh sáng, cưa xích mạnh mẽ để sử dụng cho chủ nhà. With low-emission engines, low vibration technology and a value price, MS 170 makes quick work of trimming or cutting small trees, fallen limbs after storms and other tasks around the yard. Start the MS 170 by following these simple steps:
- Fill the fuel tank with a fresh mixture of high-quality, unleaded gasoline and two-cycle engine oil. Use a 50-to-1 ratio of gas to oil for the proper mixture.
- Prime the carburetor by depressing the primer bulb three to five times until it feels firm.
- Place the saw on level ground and pull the choke lever all the way out to the “full” position.
- Grasp the saw’s rear handle with your right hand and place your left hand on top of the front handle.
- Insert your right foot into the stirrup behind the guide bar and press down on the front handle to activate the saw’s brake system.
- Kéo dây khởi động từ từ cho đến khi bạn cảm thấy lực cản, then pull it rapidly until the engine starts. Move the choke lever to the “run” position once the engine.
The chainsaw consists of the following parts:- Động cơ- The guide bar- The saw chain- The sprocket nose- The cutting teeth- The depth gauge – The file. You’ll also need to know how to start the chainsaw. Để làm điều này, you’ll need to:
- Prime the carburetor
- Press the decompression valve
- Pull the starter cord slowly until you feel resistance
- Pull the starter cord rapidly until the engine starts Once the engine is started, you can begin cutting.
Remember to:
- Use a steady Cutting rhythm
- too fast will cause kickback, too slow will cause the saw to bind
- Keep the guide bar and saw chain lubricated
- this will help prolong their life and prevent them from overheating.
what if stihl ms 170 sẽ không bắt đầu?
Nếu Stihl MS của bạn 170 cưa máy sẽ không bắt đầu, có một vài điều bạn có thể kiểm tra để khắc phục sự cố. Ngày thứ nhất, make sure that there is fresh fuel in the tank and that the gas and oil are mixed correctly.If the saw still won’t start, the next thing to check is the spark plug.
Remove the spark plug and inspect it for debris or damage. If the plug looks dirty or damaged, clean it or replace it with a new one.Another possible cause of a chainsaw that won’t start is a clogged air filter. Remove the air filter and inspect it for dirt or debris. Nếu nó bẩn, clean it with soap and water or replace it with a new one.If you have checked all of these things and the chainsaw still won’t start, take it to a qualified repair person for further diagnosis.
Ngày thứ nhất, kiểm tra hỗn hợp nhiên liệu. The fuel mix should be 50:1, meaning 50 parts gas to 1 một phần dầu. Nếu hỗn hợp nhiên liệu quá giàu hoặc quá loãng, it can cause starting issues.Next, kiểm tra bugi. The spark plug should be clean and dry. If it is wet or dirty, it needs to be replaced.If the saw still won’t start, the carburetor may need to be cleaned or rebuilt. This is a more advanced repair and should be done by a qualified technician.Finally, if none of these solutions work, you may need to replace the ignition coil. This is also a more advanced repair and should be done by a qualified technician.
what if Stihl MS170 won’t stay running?
If your Stihl MS170 chainsaw won’t stay running, có một vài điều bạn có thể kiểm tra để khắc phục sự cố. Ngày thứ nhất, make sure that the fuel mixture is correct. The fuel mixture for a Stihl MS170 is 50:1 tỷ lệ khí so với dầu. If the mixture is too rich or too lean, it can cause the chainsaw to stall.Another possible reason why your chainsaw won’t stay running is that the air filter is dirty. A dirty air filter can restrict airflow and cause the engine to stall.
Clean or replace the air filter if necessary.Lastly, kiểm tra bugi xem có cần thay không. A fouled or damaged spark plug can prevent the engine from starting or cause it to stall.If you’ve checked all of these things and your Stihl MS170 still won’t stay running, take it to a qualified repair technician for further diagnosis and repair.
Check the fuel mix. The fuel mix should be 50:1, meaning that for every 50 parts of gas, there should be 1 một phần của dầu. If the fuel mix is not correct, the chainsaw will not run properly. Tiếp theo, kiểm tra bộ lọc không khí. A dirty air filter can restrict air flow and cause the chainsaw to run poorly. A dirty or faulty spark plug can prevent the engine from starting or cause it to run poorly. Clean or replace the spark plug as needed.If you have checked all of these things and the chainsaw still won’t stay running, take it to a qualified service technician for further diagnosis and repair.
How do you Unflood a Stihl ms170?
Ngày thứ nhất, kiểm tra bugi xem có bị tắc không. Nếu nó là, clean it with a wire brush and try starting the saw again.If the saw still won’t start, the next step is to check the fuel mix. The correct fuel mix for a Stihl ms170 is 50:1 khí sang dầu. If the mix is too rich or too lean, the saw will have trouble starting.If you’re still having trouble, the next step is to check the air filter. A dirty air filter can prevent the engine from getting enough air, which will make it hard to start.
If you’ve tried all of these things and your saw still won’t start, it may be time to take it to a qualified technician for further diagnosis. If your Stihl ms170 is flooded, there are a few things you can do to try and get it started again.First, remove the air filter and clean it off. sau đó, remove the spark plug and clean it with a wire brush. Once the spark plug is clean, put it back in and try starting the saw again.If the saw still won’t start, bạn có thể cần phải điều chỉnh bộ chế hòa khí.
Turn the adjustment screws clockwise until they stop. sau đó, turn them counterclockwise 1 1/2 lượt. Cuối cùng, try starting the saw again.If your Stihl ms170 still won’t start, take it to a certified Stihl dealer for further assistance.
How to Maintain your MS 170 máy cưa?
Nếu bạn là người dùng cưa máy, then you know that proper maintenance is essential to keeping your saw in good working condition. Hôm nay, we’re going to show you how to maintain your MS 170 chainsaw so that it will always be ready for action.First things first: you’ll need to have the proper tools on hand. These include a chainsaw file, a chainsaw sharpener, a chainsaw chain oiler, and a clean rag. You’ll also need access to a workbench or other stable surface.Once you have all of your tools gathered, it’s time to start Maintenance 101. The first step is to check the tension of your chainsaw chain. This is done by holding the bar with one hand and pulling on the chain with the other.
The chain should give about an inch before it becomes tight. If it doesn’t, then you’ll need to use the adjustment screws on the side of the saw to loosen or tighten the chain as needed.The next step is to sharpen your chainsaw chain. This is done with the chainsaw file. Start by holding the file at a 30-degree angle to the chain and moving it from front to back along each tooth.
Nếu bạn là người dùng cưa máy, then you know that one of the most important things to do is keep your saw well-maintained.One of the most important things you can do is keep the chain sharp. A dull chain can cause the saw to bind, có thể nguy hiểm. You should check the sharpness of the chain regularly and sharpen it as needed.
Another important thing to do is to clean the air filter regularly. A dirty air filter can cause the engine to run hotter, which can lead to damage. Clean the air filter according to the manufacturer’s instructions.It’s also important to oil the chain regularly. This helps keep the chain lubricated and running smoothly. Be sure to use a quality chainsaw oil, and follow the manufacturer’s instructions for how often to oil the chain. By following these simple tips, you can help ensure that your MS 170 (or any other chainsaw) runs smoothly and safely.
Bản tóm tắt
If you’re having trouble getting your Stihl MS 170 to start, don’t worry — there are a few things you can try. Ngày thứ nhất, make sure that you’re using fresh fuel and oil mix. Nếu điều đó không làm việc, check the air filter to see if it’s dirty and needs to be replaced. Và cuối cùng, if all else fails, take the saw to a qualified dealer or service center for further diagnosis. With a little bit of troubleshooting, you should be able to get your MS 170 up and running in no time.