Stihl MS 661 C-M harika bir motorlu testeredir, ama tüm motorlu testereler gibi, it can have some problems from time to time. Bu blog yazısında, we’ll take a look at some of the possible problems you might encounter with your Stihl MS 661 C-M motorlu testere, as well as some solutions to those problems.

Stihl MS 661 SANTİMETRE: Frequently Asked Questiuons

Stihl MS ne zaman 661 C-M come out?

Stihl MS 661 C-M was first released in 2013. It is a powerful saw that is designed for professional use. It has a lot of features that make it a great saw for those who need a powerful tool to get the job done.

CC Stihl MS nedir? 661 SANTİMETRE?

The CC of a Stihl MS 661 SANTİMETRE dır-dir 91.6. This means that the saw is capable of cutting through 91.6 cubic centimeters of wood in a single minute. MS 661 C-M is a powerful saw that is designed for professional use. It is one of the most popular saws among professional loggers and arborists.

MS nedir 661 C-M specification?

• Yer değiştirme: 91,1 cm³
• Güç çıkışı: 5,4/7,3 kW/bg
• Ağırlık: 7,4 kilogram
• Güç-ağırlık oranı: 1,4 kg/kW
• Ses basınç seviyesi: 105 dB(A)
• Ses gücü seviyesi: 118 dB(A)
• Titreşim seviyesi sol/sağ: 6,9/5,6 m/s²
• Testere zinciri adımı: 3/8″
• STIHL Oilomatic testere zinciri tipi: Hızlı Süper (RS)

Bir MS kaç beygir gücü yapar 661 C-M have?

Stihl MS 661 C-M is a gas-powered chain saw designed for general use. It has a peak output of 6.3 horsepower and can handle most tasks a homeowner would need it for. Yine de, bu testereyle ortaya çıkabilecek birkaç sorun var, and some easy solutions.

Stihl ne kadar 661 C-M weight?

One of which is its weight; at just over 26 pound, this machine can be heavy to carry around. To help offset the weight of the MS 661 SANTİMETRE, many homeowners opt to use a backpack attachment or an optional wheeled cart. When using either option, it’s important to make sure the machine is properly balanced and secure so as not to cause strain on your back or arms.

Stihl hangi zinciri yapar? 661 C-M have from the factory?

Stihl MS 661 C-M comes with a 3/8″ PMC3 saw chain from the factory. This chain is designed for use with a saw with a guide bar that is 20″ or less in length.

How big of a bar can you put on a Stihl MS661 C-M?

The answer to this question depends on a few factors, such as the size of the saw and the type of bar you are using. Örneğin, if you are using a 16″ bar, you could probably put a 36″ bar on a Stihl MS 661 SANTİMETRE. Yine de, if you are using a 20″ bar, you might be limited to a 28″ or 30″ bar.

What’s the Stihl MS661 C-M max bar length?

MS 661 C-M has a maximum bar length of 36 inç, which means that it can handle even the most challenging tasks. If you need a saw that can handle anything, Stihl MS 661 C-M is the saw for you.

Stihl MS ne kadar 661 SANTİMETRE?

Bir Stihl MS 661 C-M chain saw typically retails for around $1,500. Yine de, prices may vary depending on the retailer, konum, and other factors. If you want to know more details you can search on the official website.

Stihl MS'i nerede bulabilirim? 661 C-M for sale?

There are a few ways that you can find the Stihl MS 661 C-M for sale. You can either go to a Stihl dealer or you can find it online. If you go to a Stihl dealer, they will more than likely have it in stock. If you cannot find it at a Stihl dealer, then your next best option would be to look online. You can find it online through different retailers or even through online auctions.

MS yapar mı 661 C-M come with a case?

Stihl MS 661 C-M is a gas-powered chain saw that comes with a case. Yine de, there have been reports of the case breaking. If you are planning on purchasing the saw, it is important to ensure that you purchase a case that will fit the saw properly. bunlara ek olarak, make sure that the saw has enough fuel to last during use.

Stihl MS 661 SANTİMETRE: Guidance and Instructions

How to adjust the carburetor on a MS 661 SANTİMETRE?

Stihl MS 661 C-M carburetor can be adjusted to fine tune the performance of the engine. There are a few different ways to adjust the carburetor on this mower. Follow these instructions to adjust the carburetor:

1. Locate and remove the fuel tank cap and unscrew the filler neck.
2. Remove the air filter cover by gently prying it off with a flat head screwdriver.
3. Be careful not to lose screws or other pieces while doing this!
4. Slide the carburetor bowl off of the engine block. The bowl should still be attached to one end of the throttle slide by a small spring clip.
5. Inspect both jets and make sure they are clean and free of debris. Be sure to replace jets if they become clogged or if your mower doesn’t run as well as it should now that you have cleaned everything up!
6. Tighten them until they just start.

Stihl MS için çubuk yağ pompası nasıl değiştirilir 661 SANTİMETRE?

1. Draining the oil tank. Before you start working on the bar oil pump, you need to drain the oil tank. Bunu yapmak için, remove the oil cap and unscrew the oil hose from the pump. O zamanlar, let the oil drain out completely.
2. Accessing the bar oil pump. To access the bar oil pump, you need to remove the sprocket cover and the bar. Once the cover and bar are removed, you will be able to see the pump.
3. Replacing the bar oil pump. To replace the bar oil pump, simply remove the old pump and install the new one in its place. Make sure that the new pump is properly seated and that all the connections are tight.
4. Refilling the oil tank. Once the new pump is installed, you can now refill the oil tank. Screw the oil hose back into the pump and then replace the oil cap.

Stihl MS'de zincir gerdirici nasıl ayarlanır? 661 SANTİMETRE?

Stihl MS'niz varsa 661 C-M chainsaw is producing too much vibration, it may be due to the chain tensioner. The tensioner is a small, metal piece located at the front of the saw near the cutting chain.

Gergiyi ayarlamak için, first loosen the two screws that hold it in place. O zamanlar, use a flathead screwdriver to turn the tensioner clockwise or counterclockwise until the desired tension is achieved. Nihayet, retighten the screws and test the saw to see if the vibration has been reduced.

Stihl MS için hangi yakıt karışımı kullanılır? 661 SANTİMETRE?

When using gasoline with this chainsaw, it’s important to use a fuel mixture that is designed specifically for this type of equipment. Genel olarak, a mixture that is between 9 ve 11% ethanol will work well with the MS 661 SANTİMETRE. This mixture will provide plenty of power while also being easy on the engine.

If you’re planning on using diesel with your MS 661 SANTİMETRE, be sure to use a fuel blend that is specifically made for chain saws. A blend that is between 5 ve 7% diesel should work well in this case. This mixture will provide plenty of power while also being relatively safe for the engine.

Stihl MS 661 SANTİMETRE: Troubleshootings

1. Stihl 661 SANTİMETRE: Suddenly stop while cutting

Stihl MS kullanıyorsanız 661 C-M chainsaw and it suddenly stops while you’re cutting, there are a few potential causes.

1. Öncelikle, check the chain to make sure it’s not damaged or dull. If the chain is damaged or dull, it can cause the saw to stop abruptly.
2. İkinci, yakıt karışımını kontrol edin. If the fuel mix is too lean, it can cause the engine to stall. Üçüncü, hava filtresini kontrol et. Hava filtresi kirliyse, it can restrict air flow to the engine and cause it to stall.
3. Nihayet, make sure the spark plug is clean and gap is set correctly. If the spark plug is fouled or the gap is incorrect, it can cause the engine to misfire and stall.

2. Stihl 661 SANTİMETRE: Motor yavaş yavaş güç kaybediyor

The engine of your Stihl MS C-M might lose power gradually. This can be caused by a number of things, but the most common cause is that the engine’s oil has become dirty. eğer durum buysa, you’ll need to take some simple steps to clean the engine and restore its power.

To clean the engine, start by draining any excess oil from the crankcase using a suitable container. Sonraki, use a degreaser to remove all of the dirt and grime from inside the engine. Nihayet, fill up the crankcase with fresh oil and replace any parts that were damaged in the cleaning process.

3. Stihl 661 SANTİMETRE: Zincir gevşek olma eğilimindedir

There seems to be an issue with the chain on the MS 661 C-M pruner. It tends to be loose and require a lot of force to move the chain up and down. This can lead to problems such as missed cuts, which can be quite frustrating. The good news is that there are easy solutions for fixing this problem. Burada 3 tips to resolving your MS C-M chain issues:

1. Inspect the connection between the chain and the sprocket: If the connection between the chain and sprocket is loose, it will cause difficulty in moving the chain up and down. Bunu düzeltmek için, you will need to tighten up the connection with a wrench. Make sure not to overdo it, though – too much torque could damage your tool.
2. Check if there’s debris or sand blocking the sprocket: If there’s debris or sand blocking the sprocket, it will also cause difficulty in moving the chain up and down. To clear out any obstructions, you will need to use a wire brush or an angle grinder. Be very careful not to damage your tool in the process!
3. Check if there’s excess oil on the chainsaw: If there’s excess oil on the chainsaw, it will also cause difficulty in moving the chain up and down. Clean off any excess oil with a damp cloth before trying again to move the chain up and down. Make sure you do this after every use.

Çözüm

Güçlü ve güvenilir bir motorlu testere arıyorsanız, Stihl MS 661 C-M is a great option. Yine de, like any chainsaw, it’s not without its possible problems. Neyse ki, there are solutions to all of these problems. With a little bit of knowledge and some basic tools, Stihl MS'inizi saklayabilirsiniz 661 C-M running like new.