If you’re experiencing problems with your Stihl MS 400 motosserra, it’s time to take it in for servicing. Here are some common problems and solutions.
Perguntas frequentes
Quando surgiu o Stihl MS 400 sair?
O MS Stihl 400 saw its debut in 2017 and quickly became one of the most popular trimmers on the market. It has played an important role in the industry and forestry since it came.
O que CC é um Stihl MS 400 ?
A Stihl MS 400 is a gas-powered chain saw that has a 3.5 inch cutting capacity. Tem um 66.8 cc engine and can cut through hardwood, pinho, and other types of wood.
Qual é o MS 400 C-M specification?
- Deslocamento: 66,8 cm³
- Potência da saída: 4/5,4 kW/bhp
- Peso: 5,8 kg
- Relação potência/peso: 1,45 kg/kW
- Nível de pressão sonora: 107 dB(UMA)
- Nível de potência sonora: 118 dB(UMA)
- Nível de vibração esquerda/direita: 3,5/3,5 m/s²
- Passo da corrente de serra: 3/8″
Quantos cavalos de potência tem um MS 400 CM have?
O MS Stihl 400 tem uma classificação de poder de 410 cavalo-vapor. This is a powerful engine that is perfect for general forestry use, woodcutting, and other similar uses.
How much does a MS 400 C-M weight?
O MS Stihl 400 pesa 5.8 kg, ou 12.8 libras. This weight can vary depending on the model of the saw, as well as the saw’s accessories. Por exemplo, the weight of the Stihl MS 400 with a saw chain and guide bar can range from 6.3 kg to 7.1 kg.
The weight of the saw is an important consideration for many users, as it can affect the saw’s maneuverability and ease of use. Por exemplo, a saw that is too heavy may be difficult to control, while a saw that is too light may vibrate excessively.
What chain does the MS 400 C-M have from the factory?
O MS Stihl 400 comes with a 3/8″ PM3 saw chain as standard. This is a mid-range chain that is suitable for a variety of tasks, including felling small trees and cutting through branches. It is a good all-round chain that will give you good results without being too aggressive.
How big of a bar can you put on a Stihl MS400 ?
There are a few different types of bars that can be used on the Stihl MS 400. The most common type is the standard bar, which is typically between 18 e 24 polegadas de comprimento. The size of the bar you can use will depend on the model of the saw and the type of chain that is being used.
How much is a Stihl MS400 ?
O MS Stihl 400 is a chainsaw that is popular for its powerful engine and durability. It typically retails for around $1,000, although the price may vary depending on the retailer and location.
Where to find Stihl MS 400C for sale?
Se você está procurando um Stihl MS 400 à venda, there are a few different ways that you can find Stihl MS 400 à venda. One way is to look online. You can find many online retailers that sell this chainsaw. Another way is to check your local hardware store or home improvement store. Many of these stores sell this chainsaw as well.
You might also be able to find a good deal on a used model if you’re willing to do a little digging. No entanto, it’s important to make sure that you’re getting a quality product, so be sure to do your research before making a purchase.
Does the Stihl MS 400C come with a case?
O MS Stihl 400 is a popular lawn mower that comes with a case. The case is an important part of the machine, as it helps protect the machine from damage and makes it easier to transport. No entanto, some people have reported problems with the case.
If the case won’t close or opens suddenly, try tightening the screws that hold it together. Se isso não funcionar, there may be a problem with the springs inside the case. Try replacing the springs if you can find them or buying a new case.
If your machine has trouble starting up, verifique se há combustível suficiente no tanque. Make sure you have filled it up at least half way with gasoline before using it for the first time. If that doesn’t solve the problem, try cleaning out any debris that may be clogging up the engine’s carburetor.
Instruções
Como redefinir o Stihl MS 400?
Se você precisar reiniciar o Stihl MS 400, the first thing you need to do is locate the carburetor. The carburetor is located on the side of the engine, and it is responsible for regulating the air and fuel mixture that goes into the engine. Once you have located the carburetor, you need to find the adjustment screws. These screws are located on the top of the carburetor, and they are used to adjust the air and fuel mixture.
The next step is to turn the adjustment screws until the engine is running smoothly. If the engine is still running rough, you may need to increase the amount of fuel that is being delivered to the engine. Para fazer isso, you will need to turn the fuel mixture screw clockwise. Quando o motor estiver funcionando suavemente, you can turn the adjustment screws back to their original position.
Como calibrar um Stihl MS 400 CM?
It’s important to keep your Stihl MS 400 running at peak performance, and part of that is making sure it’s properly calibrated. While it’s not a difficult process, it is important to follow the steps carefully in order to get accurate results.
- Start by consulting the owner’s manual for your specific model of Stihl MS 400. This will give you the proper settings for your saw.
- Próximo, use a feeler gauge to measure the gap between the saw’s piston and the cylinder wall. This measurement should be taken at the top, middle, and bottom of the piston.
- Once you have the measurements, use a wrench to adjust the screws that hold the piston in place. The goal is to get the piston as close to the cylinder wall as possible without actually touching it.
- Finalmente, check the carburetor for proper mixture settings. This can be done by using a carburetor adjustment tool or by consulting the owner’s manual.
Following these steps will ensure that your Stihl MS 400 is properly calibrated and running at peak performance.
Como ajustar o carburador em um Stihl MS 400 CM?
Assuming you are referring to the Stihl MS 400 motosserra, the following is a step-by-step guide on how to adjust the carburetor:
- Locate the carburetor adjustment screws on the side of the carburetor. These are typically labeled “H” for high speed and “L” for low speed.
- Usando uma chave de fenda, gire o parafuso “H” no sentido horário até que esteja apertado.
- Turn the “L” screw counter-clockwise until it is tight.
- Start the chainsaw and let it idle for a few minutes.
- If the chainsaw is still running rough, turn the “H” screw counter-clockwise until it is loose. Turn the “L” screw clockwise until it is loose.
- Repeat steps 2-5 until the chainsaw runs smoothly.
How to replace bar oil pump for Stihl MS 400C ?
Assuming you have a Stihl MS 400 motosserra, the process for replacing the bar oil pump is as follows:
- Remove the bar and chain from the chainsaw.
- Unscrew the bar oil pump cap from the chainsaw body.
- Remove the old bar oil pump from the chainsaw body.
- Install the new bar oil pump into the chainsaw body.
- Screw the bar oil pump cap back onto the chainsaw body.
- Recoloque a barra e a corrente na motosserra.
Solução de problemas
EM 400 CM: não para começar
Se o seu Stihl MS 400 motosserra não liga, há algumas coisas que você pode fazer para tentar resolver o problema. Primeiro, check the fuel mixture to make sure it is correct. Se for, then check the spark plug to see if it is fouled. Se for, limpe-o e tente novamente. If the problem still persists, then you may need to take the chainsaw to a certified Stihl dealer for service.
EM 400 CM: barulho alto
Nesta secção, we’ll discuss some of the Stihl MS 400 ‘s most common noise problems and how to easily solve them.
The fan belt has come off the motor. If you’re experiencing a lot of noise from your Stihl MS 400 , chances are the fan belt has come off the motor. This is an easy fix if you have a replacement belt available: simply replace the belt and you’re back in business! If you don’t have a replacement belt handy, try gently rethreading the motor shaft using a wrench or pliers.
The carburetor needs cleaning or adjustingIf your machine is making excessive noise and doesn’t seem to be cutting as well as it used to, it may be time for the carburetor to get cleaned or adjusted. Many times, this issue can be resolved by visiting a professional mechanic who can adjust the carburetor according to your specific needs. Se isso não funcionar, consider replacing the carburetor entirely.
EM 400 CM: Rodas lentas
Se o seu Stihl MS 400 tem rodas lentas, há algumas coisas que você pode fazer para acelerar. Uma opção é ajustar a tensão na corrente. This can be done by loosening the screws that hold the chain in place and then tightening or loosening the tensioner until the chain is tight or loose enough.
Another option is to adjust the fuel mixture. This can be done by adding more or less oil to the gas tank. The final option is to adjust the carburetor. This can be done by turning the screws on the carburetor until the engine runs at the desired speed.
O fim
We hope that this article has helped you to better understand the potential problems that can occur with the Stihl MS 400. Como sempre, it is important to consult with a professional before attempting any repairs on your own. No entanto, we hope that this article has given you a better understanding of what to look for and how to fix some of the most common issues.