당신이 Stihl MS라면 250 소유자, then you know that this powerful chainsaw can be a great asset when it comes to tackling tough projects. 하지만, 어떤 도구처럼, MS 250 can sometimes experience problems. 이 기사에서, we’ll take a look at some of the most common 스틸 MS 250 problems and offer some tips on how to solve them.

FAQ

Stihl MS는 언제 250 chainsaw come out?

스틸 MS 250 에서 처음 소개되었습니다. 2009. It was designed as a lightweight saw for occasional use, and quickly became one of the most popular models in the Stihl range. It remains a firm favourite with customers today thanks to its easy-to-use design and powerful engine. It was designed as a lightweight saw for general purpose use.

Stihl MS는 어떤 CC입니까? 250?

Stihl MS의 CC 250 ~이다 50. This means that the engine is 50 입방 센티미터 크기. This is a mid-sized saw that is good for general use around the house or on the farm.

MS는 무엇입니까 250 사양?

• 배수량: 45,4 cm³
• 전원 출력: 2,3/3,1 kW/마력
• 무게^: 4,6 킬로그램
• 전력 대 중량 비율: 2 kg/kW
• 음압 레벨: 99 dB(ㅏ)
• 사운드 파워 레벨: 111 dB(ㅏ)
• 진동 레벨 좌/우: 5,7/6,8 m/s²
• 톱 체인 피치: 3/8"피
• STIHL Oilomatic 톱 체인 유형: 마이크로 피크 3 (PM3)

How many horsepower does a Stihl MS250 have?

스틸 MS 250 has a two-stroke engine that delivers 1.8 마력. This may not seem like a lot, but it is enough power to get the job done quickly and efficiently. The saw also has a chain brake that helps to prevent kickback, and a chain catch that helps to prevent the chain from coming off of the saw.

How much does a Stihl MS250 weight?

스틸 MS 250 Chainsaw weighs around 11.5 에게 12.5 파운드. The weight will depend on the model of the chainsaw and the specific features that it has.

Stihl은 어떤 체인을 사용합니까? 250 공장에서 가지고?

스틸 MS 250 comes with a standard 3/8″ Picco Micro 3 (PM3) chain from the factory. This chain is designed specifically for use with the MS 250 and is one of the most popular options for this saw. It is a very versatile chain that can be used for a variety of tasks, 장작 자르기 포함, 벌채 나무, and even limbing.

Stihl에 얼마나 큰 막대를 넣을 수 있습니까? 250?

There is no definitive answer to this question as it will depend on a number of factors, such as the specific model of Stihl MS 250 you have, the size and weight of the bar, and the type of wood you are cutting. 하지만, as a general guide, you should be able to put a bar that is up to 18 inches long on a Stihl MS 250. If you are cutting heavier or tougher wood, you may need a longer bar, but this will also depend on the power of your saw.

MS는 무엇입니까 250 최대 바 길이?

스틸 MS 250 최대 바 길이는 20 신장. This saw is a great choice for cutting firewood, 나무 다듬기, and general yard work. It has plenty of power to handle most tasks, but isn’t so big and bulky that it’s difficult to maneuver.

MS는 얼마입니까? 250?

MS 250 주위에 가격이 책정되어 있습니다 $320, making it one of the more expensive chainsaws on the market. 하지만, its features and performance make it worth the price for those who need a professional-grade chainsaw.

Stihl MS를 찾을 수 있는 곳 250 판매용?

There are a few different places that you can look for a Stihl MS 250 판매용. One option is to check your local hardware store or home improvement store. Another option is to check online retailers such as Amazon. You can also check with the manufacturer directly to see if they have any retailers in your area that sell their products.

Stihl MS는 250 케이스와 함께?

스틸 MS 250 케이스와 함께 제공, 그러나 그것은 그다지 보호적이지 않습니다. The case has a few cuts in it, and the sawdust and oil have stained it. I wouldn’t recommend using this saw without a better case. If you’re looking for an affordable choice for a mid-sized chainsaw, the Stihl MS250 is a decent option.

가이드 방법

How to reset the Stihl MS250?

Stihl MS를 재설정해야 하는 경우 250, 이 단계를 따르세요:

1. Turn the power off and disconnect the spark plug.
2. 에어필터를 빼서 청소해주세요.
3. Remove the fuel tank cap and unscrew the fuel line from the carburetor.
4. Use a clean cloth to wipe any dirt or debris from the carburetor.
5. Reconnect the fuel line and screw it back into place.
6. Replace the air filter and fuel tank cap.
7. Reconnect the spark plug and turn the power on.

How to calibrate a Stihl MS250?

Calibrating the Stihl MS 250 is an important step in maintaining your equipment’s performance. Calibration ensures that the engine and cutting system are operating at their peak, and can prevent damage to the machine and potential injuries. To calibrate your Stihl MS 250:

1. Begin by ensuring that the chainsaw is turned off and the spark plug is disconnected.
2. 다음, remove the air filter cover and the air filter itself.
3. 기화기 조정 나사 찾기, which are usually marked “H” and “L.”
4. 드라이버 사용, 단단히 조일 때까지 "H" 나사를 시계 방향으로 돌립니다., then back it out 1 1/2 회전.
5. Repeat this process with the “L” screw.
6. 지금, turn the chainsaw on and let it run for a few minutes.
7. 전기톱이 여전히 제대로 작동하지 않는 경우, 단계를 반복하다 4-6 until it is running smoothly.

How to adjust the carburetor on a Stihl 250?

Stihl MS라면 250 is running too lean or too rich, you may need to adjust the carburetor. This process is relatively simple, but it is important to follow the instructions carefully in order to avoid damaging the engine.

1. 첫 번째, you will need to identify which screws need to be adjusted. The “H” screw controls the high speed mixture, while the “L” screw controls the low speed mixture. The “T” screw controls the idle speed.
2. 다음, you will need to adjust the screws accordingly. 엔진이 너무 희박하게 작동하는 경우, you will need to turn the screws clockwise. If the engine is running too rich, you will need to turn the screws counterclockwise.
3. 드디어, you will need to test the engine to make sure that the adjustments have been made correctly. If the engine is still not running properly, you may need to repeat the process.

How to replace bar oil pump for Stihl 250?

Assuming you have the tools and know-how to do this task, here are the steps to follow to replace the bar oil pump on your Stihl MS 250:

1. Remove the bar and chain from the saw.
2. Unscrew the bar clamp nut and washer, and remove the bar clamp.
3. Unscrew the two screws that hold the sprocket cover in place.
4. Remove the sprocket cover and chain.
5. Unscrew the three screws that hold the oil pump in place.
6. Remove the old oil pump and install the new one.
7. Reassemble the sprocket cover and bar clamp, and screw everything back in place.
8. Put the bar and chain back on the saw.

How to adjust the chain tensioner on MS 250?

Stihl MS가 있는 경우 250 전기톱, the tensioner is an important part of the saw. The tensioner controls how tight the chain is on the bar, and it affects how easily the saw cuts. It’s important to adjust the tensioner so that the chain is tight enough to cut wood, but not so tight that it’s difficult to operate. 텐셔너를 조정하려면:

1. Disconnect the spark plug wire from the saw.
2. Loosen (or remove) each screw on either side of the tensioner.
3. Tune each screw by turning it slightly in a clockwise direction while holding down on one side of the blade with your other hand.
4. Re-connect the spark plug wire to the saw and close the throttle.
5. Check to see if there is a difference in how smoothly or quicklythe saw cuts wood. If there is a difference, re-adjust each screw until both sides ofthe blade are cutting equally well.

What fuel mix to use for the MS 250?

What fuel mix should you use for your Stihl MS 250 전기톱? It really depends on what you’re going to be using the saw for and what the conditions are like where you’ll be using it. If you’re not sure, then it’s always best to consult with your saw’s owner’s manual.

Stihl MS에서 체인이 얼마나 단단해야 합니까? 250?

When it comes to chains, the tighter they are, the better. This is especially true with the Stihl MS 250 사슬 톱. The MS250 is a powerful machine that can handle a lot of tough cuts. 그래서, it’s important to make sure that the chain is tight enough so that it doesn’t loose its tension and start cutting incorrectly.

There are three ways to check the tension on your chain: using a torque wrench, by feel, or by using a gauge. Using a torque wrench is the most accurate way to check the tension, but it can be time-consuming. By feel is less accurate but more user-friendly, and using a gauge is the least accurate but quickest method.

If you can move your fingers apart easily then the chain is too loose; if they stay together then the chain is too tight. Chain wear can also affect how tight your chain needs to be. 이런 일이 발생하면, make sure to replace your chain as soon as possible because it could lead to problems with your machine.

문제

스틸 MS 250 전기톱 has Loud noise

Stihl MS라면 250 has started making a loud noise, 문제를 해결하기 위해 할 수 있는 몇 가지 방법이 있습니다.. 첫 번째, 공기 필터를 점검하여 청소 또는 교체가 필요한지 확인하십시오.. 다음, 점화 플러그가 오염되었거나 손상되었는지 확인하십시오.. 드디어, check the muffler to see if it is clogged or damaged. If you cannot fix the problem yourself, you will need to take the saw to a qualified repair shop.

스틸 MS 250 전기톱 has Slow wheels

Stihl MS라면 250 바퀴가 느리다, 문제를 해결하기 위해 할 수 있는 몇 가지 방법이 있습니다.. 첫 번째, check the air filter and clean it if it is dirty. 다음, check the spark plug and replace it if it is old or damaged. 드디어, check the fuel mixture and make sure it is the correct ratio.

Oiler on Stihl MS 250 chainsaw is not working

If you are experiencing problems with your Stihl MS chainsaw, there are a few easy solutions. The first is to make sure that the oiler is installed correctly and calibrated. If your oiler isn’t working properly, the chain will not be lubricated and will cause damage to the saw. 추가적으로, it’s important to keep the chain clean and free of debris.

If you have any other questions about your Stihl MS chainsaw, feel free to contact customer service.

요약

스틸 MS 250 훌륭한 전기톱이다, but like any piece of machinery, it can have its share of problems. 운 좋게, most of these problems are relatively easy to solve. With a little bit of knowledge and the right tools, Stihl MS를 유지할 수 있습니다. 250 running like new