There have been a few complaints about the Stihl MS 261 recently. Some people have said that the saw is hard to start, while others have said that it doesn’t cut as well as it used to. So what’s the problem? And what can we do about it?

Let’s check the answer in our review and this article can help you solve the problems so that you can use스틸 MS 261 전기톱 better.

스틸 MS 261 FAQ

Stihl MS는 언제 261 나오다?

스틸 MS 261 에서 처음 소개되었습니다. 2009. It is a powerful and versatile saw that is perfect for a variety of applications. It is a great choice for professionals and hobbyists alike.

Stihl MS는 어떤 CC입니까? 261?

The CC on a Stihl MS 261 is the cubic centimeters of the engine. This is a two-cycle engine, meaning that there are two strokes per cycle. MS 261 의 변위가 있습니다 56.5 참조, meaning that the engine size is 56.5 입방 센티미터.

MS는 무엇입니까 261 사양?

기술 사양	값
배수량	50,2 cm³
전원 출력	2,8/3,8 kW/마력
무게 1)	5,2 킬로그램
전력 대 중량 비율	1,9 kg/kW
음압 레벨 2)	102 dB(ㅏ)
사운드 파워 레벨 3)	114 dB(ㅏ)
사운드 파워 레벨 3)	113 dB(ㅏ)
진동 레벨 좌/우 4)	3,5/3,5 m/s²
톱 체인 피치	.325″
STIHL Oilomatic 톱 체인 유형	래피드 슈퍼 (RS)

MS는 몇 마력입니까? 261 가지다?

스틸 MS 261 has a horsepower of 2.6. This is a high-powered chainsaw that can handle most tasks you need it to. 하지만, 어떤 전기톱처럼, there are some things you should know in order to take care of it and ensure its longevity.

How much does a Stihl MS261 weight?

스틸 MS 261 다양한 작업을 처리할 수 있는 강력하고 다재다능한 톱입니다.. 그것은 무게가 5.2 킬로그램, making it easy to carry around and use for a variety of projects.

What chain does the Stihl MS261 have from the factory?

스틸 MS 261 3/8″ Picco Micro와 함께 제공 3 표준 톱 체인. This is a low-vibration and low-kickback saw chain which is ideal for use with a Stihl MS 261. It is also a low-profile, high-performance chain that is designed for use with small-engine saws.

Stihl에 얼마나 큰 막대를 넣을 수 있습니까? 261?

When measuring the width of your bar, make sure to include the chain guard and any other attachments that come with the saw.

The standard width of a Stihl MS 261 bar is 16 신장, but you can also buy extended bars that are 18 또는 20 inches in width. If you have a lot of trees or other large objects to cut down, you may want to consider getting one of these wider bars. Another consideration when choosing a bar size for your Stihl MS 261 is the chain tensioning system.

Most saws come with either a single- or double-chain tensioner. If you have a lot of heavy cutting jobs, it’s important to get an appropriately sized chain tensioner. For most people, a double-chain tensioner will be plenty strong enough. 하지만, if you do lots of cutting on uneven ground or around obstacles, you may want to go with a single-chain tensioner.

스틸이 뭔데 261 최대 바 길이?

스틸 MS 261 max bar length is the longest bar on the saw and it can be used to cut large trees. MS 261 Chainsaw has the ability to use bars that are up to 24″ in length. This saw is also able to use the Picco Micro 3 (PM3) 톱 체인.

Stihl MS는 얼마입니까 261?

 The price of the Stihl MS 261 is in the range between $600 그리고 $700. 더 자세히 알고 싶으시면 네이버에서 검색하시면 됩니다 공식 웹 사이트.

Stihl MS를 찾을 수 있는 곳 261 판매용?

There are many places to find Stihl MS 261 판매용. One place to find them is online through retailers such as Amazon or eBay. Another place to find them is through local dealerships or stores that sell outdoor power equipment. 드디어, you can also find them through private sellers.

MS는 261 케이스와 함께?

스틸 MS 261 케이스와 함께 제공, but it can be difficult to find replacement parts for the saw. 스틸 MS 261 is a gas-powered saw that uses an automatic oil delivery system. This means that if the oil level in the engine becomes low, the saw will not start. Replacement parts for this saw are difficult to come by, and can cost a lot of money.

스틸 MS 261 Guidance

MS 리셋 방법 261?

방법은 다음과 같습니다.:

1. Turn off the mower and disconnect the battery cables.
2. Remove the handle from the machine.
3. Remove the four screws that hold on the deck plate.
4. Lift up the deck plate and set it aside.
5. Disconnect all of the wires from inside of the machine by gently pulling on them until they come out of their connectors. Be careful not to pull on any of the blades or moving parts!
6. Reattach all of the wires in reverse order, making sure that each connector is tight before replacing the deck plate and screwing it in place.

Stihl MS 보정 방법 261?

Here’s what you’ll need to do to get your Stihl MS 261 running properly again.

1. Start by removing the air filter and spark plug.
2. 다음, use a socket wrench to loosen the high speed and low speed screws on the carburetor.
3. Once the screws are loosened, turn the high speed screw clockwise until it is flush with the carburetor housing. 그 다음에, turn the low speed screw counterclockwise until it is also flush with the carburetor housing.
4. 드디어, reinstall the air filter and spark plug.

How to adjust the carburetor on a Stihl MS261?

The carburetor on a Stihl MS 261 can be adjusted to improve performance and fuel economy. 기화기를 조정하려면:

1. Open the carburetor cover by pressing down on the tab in the center of the cover and pulling it off.
2. Remove the air filter by unscrewing it from the top of the carburetor.
3. Carefully lift out the float bowl and set it aside.
4. Turn the screw located at the base of each float until they are just loose enough to move, then replace them in their original position. Be careful not to overtighten these screws!
5. Replace all screws, making sure they are properly tightened.
6. Push down firmly until it clicks into place.

How to replace bar oil pump for Stihl MS261?

Here are instructions for replacing a bar oil pump on a Stihl MS 261:

1. Remove the bar and chain from the saw.
2. Unscrew the bar oil pump cover with a Phillips head screwdriver.
3. Remove the old bar oil pump and O-ring.
4. Install the new bar oil pump and O-ring.
5. Screw the bar oil pump cover back on.
6. Reattach the bar and chain.
7. Test the saw to make sure the bar oil pump is working properly.

스틸 MS 261 문제 해결

How to do if the Stihl 261 not to start?

Stihl MS라면 261 전기톱이 시동되지 않습니다, there are several things you can check to troubleshoot the problem.

1. 첫 번째, make sure that there is fresh fuel in the tank and that the fuel mixture is correct. If the fuel is old or stale, it may not be combustible enough to start the saw.
2. 다음, check the spark plug to make sure it is clean and in good condition. If the plug is fouled or damaged, 교체해야 할 것입니다..
3. 드디어, check the air filter to make sure it is clean and not clogged. A dirty or clogged air filter will restrict air flow to the engine and make it difficult to start.

How to do if the Stihl 261 바퀴가 느리다?

Stihl MS에 문제가 있는 경우 261 전기톱, there are a few things that you can do to get it working again. One common issue that people experience with their chainsaw is a slow wheel. If the wheel is not spinning fast enough, it will cause the chain to become tangled and eventually stop working altogether. There are a few easy fixes for this issue: 

1. Check the chain tension. The chain should be tight against the bar but not so tight that it’s difficult to turn. Over-tightening the chain can cause it to break, so make sure it’s just snug enough.
2. Clean and lubricate the wheel bearings. These will wear over time and can lead to the wheel becoming sluggish. Use a quality oil such as Stihl Chain Lube or WD-40 and work it into each bearing cap until they are fully coated.
3. Replace the wheel if necessary. If debris has built up on the hub or inside of the rim, this will cause difficulty in spinning the wheel and may necessitate replacement.

How to do if the chain of Stihl MS 261 느슨해지는 경향이 있다?

Stihl MS라면 261 chain is loose, 문제를 해결하기 위해 할 수 있는 일이 몇 가지 있습니다.. 첫 번째, 체인 장력 확인. 체인이 너무 느슨한 경우, 그것은 바짝 죄어질 필요가 있을 것이다. 이것을하기 위해, use the chain tensioner to turn the tensioning screw clockwise until the chain is tight.

If the chain is still loose after tensioning it, you may need to adjust the bar clamp. 이것을하기 위해, loosen the bar clamp bolts and slide the bar clamp forward or backward until the chain is tight. 그 다음에, retighten the bar clamp bolts.

If you still can’t get the chain tight, you may need to replace the bar clamp. 이것을하기 위해, remove the old bar clamp and install a new one in the same position. 그 다음에, follow the steps above to adjust the new bar clamp.

끝

이 기사가 Stihl MS에서 발생할 수 있는 잠재적인 문제를 더 잘 이해하는 데 도움이 되었기를 바랍니다. 261. 언제나처럼, 직접 수리를 시도하기 전에 전문가와 상담하는 것이 중요합니다.. 하지만, 이 문서를 통해 무엇을 찾아야 하고 가장 일반적인 문제를 해결하는 방법에 대해 더 잘 이해할 수 있기를 바랍니다..