There have been a few complaints about the Stihl MS 261 recently. Some people have said that the saw is hard to start, while others have said that it doesn’t cut as well as it used to. So what’s the problem? And what can we do about it?

Let’s check the answer in our review and this article can help you solve the problems so that you can useスチールMS 261 チェーンソー better.

スチールMS 261 よくある質問

Stihl MS はいつ 261 出てくる?

スティールのMS 261 で最初に導入された 2009. It is a powerful and versatile saw that is perfect for a variety of applications. It is a great choice for professionals and hobbyists alike.

Stihl MS の CC とは 261?

The CC on a Stihl MS 261 is the cubic centimeters of the engine. This is a two-cycle engine, meaning that there are two strokes per cycle. MS 261 の変位があります 56.5 cc, meaning that the engine size is 56.5 立方センチメートル.

MSとは 261 仕様?

技術仕様	価値
変位	50,2 cm³
電力出力	2,8/3,8 キロワット/馬力
重さ 1)	5,2 kg
パワーウェイトレシオ	1,9 キロ/キロワット
音圧レベル 2)	102 dB(あ)
音響パワーレベル 3)	114 dB(あ)
音響パワーレベル 3)	113 dB(あ)
振動レベル左右 4)	3,5/3,5 m/s²
ソーチェーンピッチ	.325」
STIHL Oilomatic ソーチェーンタイプ	ラピッドスーパー (RS)

MSの馬力は何馬力？ 261 持ってる?

スティールのMS 261 has a horsepower of 2.6. This is a high-powered chainsaw that can handle most tasks you need it to. でも, チェーンソーのように, there are some things you should know in order to take care of it and ensure its longevity.

How much does a Stihl MS261 weight?

スティールのMS 261 さまざまなタスクを処理できる強力で用途の広いのこぎりです. It has a weight of 5.2 kg, making it easy to carry around and use for a variety of projects.

What chain does the Stihl MS261 have from the factory?

スティールのMS 261 comes with a 3/8″ Picco Micro 3 saw chain as standard. This is a low-vibration and low-kickback saw chain which is ideal for use with a Stihl MS 261. It is also a low-profile, high-performance chain that is designed for use with small-engine saws.

Stihlに装着できるバーのサイズはどれくらいですか 261?

When measuring the width of your bar, make sure to include the chain guard and any other attachments that come with the saw.

The standard width of a Stihl MS 261 bar is 16 インチ, but you can also buy extended bars that are 18 また 20 inches in width. If you have a lot of trees or other large objects to cut down, you may want to consider getting one of these wider bars. Another consideration when choosing a bar size for your Stihl MS 261 is the chain tensioning system.

Most saws come with either a single- or double-chain tensioner. If you have a lot of heavy cutting jobs, it’s important to get an appropriately sized chain tensioner. For most people, a double-chain tensioner will be plenty strong enough. でも, if you do lots of cutting on uneven ground or around obstacles, you may want to go with a single-chain tensioner.

スチールとは 261 最大棒の長さ?

スティールのMS 261 max bar length is the longest bar on the saw and it can be used to cut large trees. MS 261 Chainsaw has the ability to use bars that are up to 24″ in length. This saw is also able to use the Picco Micro 3 (PM3) ソーチェーン.

Stihl MSはいくらですか 261?

 Stihl MSの価格 261 is in the range between $600 と $700. 詳しく知りたい方は検索してみてください 公式ウェブサイト.

Stihl MS の場所 261 販売のため?

There are many places to find Stihl MS 261 販売のため. One place to find them is online through retailers such as Amazon or eBay. Another place to find them is through local dealerships or stores that sell outdoor power equipment. ついに, you can also find them through private sellers.

MSはありますか 261 ケースが付属しています?

スティールのMS 261 ケースが付属しています, but it can be difficult to find replacement parts for the saw. スティールのMS 261 is a gas-powered saw that uses an automatic oil delivery system. This means that if the oil level in the engine becomes low, the saw will not start. Replacement parts for this saw are difficult to come by, and can cost a lot of money.

スチールMS 261 Guidance

MSをリセットする方法 261?

方法は次のとおりです:

1. Turn off the mower and disconnect the battery cables.
2. Remove the handle from the machine.
3. Remove the four screws that hold on the deck plate.
4. Lift up the deck plate and set it aside.
5. Disconnect all of the wires from inside of the machine by gently pulling on them until they come out of their connectors. Be careful not to pull on any of the blades or moving parts!
6. Reattach all of the wires in reverse order, making sure that each connector is tight before replacing the deck plate and screwing it in place.

Stihl MS の校正方法 261?

Here’s what you’ll need to do to get your Stihl MS 261 running properly again.

1. Start by removing the air filter and spark plug.
2. 次, use a socket wrench to loosen the high speed and low speed screws on the carburetor.
3. Once the screws are loosened, turn the high speed screw clockwise until it is flush with the carburetor housing. それで, turn the low speed screw counterclockwise until it is also flush with the carburetor housing.
4. ついに, reinstall the air filter and spark plug.

How to adjust the carburetor on a Stihl MS261?

The carburetor on a Stihl MS 261 can be adjusted to improve performance and fuel economy. キャブレターを調整するには:

1. Open the carburetor cover by pressing down on the tab in the center of the cover and pulling it off.
2. Remove the air filter by unscrewing it from the top of the carburetor.
3. Carefully lift out the float bowl and set it aside.
4. Turn the screw located at the base of each float until they are just loose enough to move, then replace them in their original position. Be careful not to overtighten these screws!
5. Replace all screws, making sure they are properly tightened.
6. Push down firmly until it clicks into place.

How to replace bar oil pump for Stihl MS261?

Here are instructions for replacing a bar oil pump on a Stihl MS 261:

1. バーとチェーンをソーから取り外します.
2. Unscrew the bar oil pump cover with a Phillips head screwdriver.
3. Remove the old bar oil pump and O-ring.
4. Install the new bar oil pump and O-ring.
5. Screw the bar oil pump cover back on.
6. Reattach the bar and chain.
7. Test the saw to make sure the bar oil pump is working properly.

スチールMS 261 トラブルシューティング

How to do if the Stihl 261 not to start?

Stihl MS の場合 261 チェーンソーが起動しない, 問題をトラブルシューティングするために確認できることがいくつかあります.

1. 初め, make sure that there is fresh fuel in the tank and that the fuel mixture is correct. If the fuel is old or stale, it may not be combustible enough to start the saw.
2. 次, スパークプラグをチェックして、きれいで良好な状態であることを確認します. If the plug is fouled or damaged, 交換する必要があります.
3. ついに, check the air filter to make sure it is clean and not clogged. A dirty or clogged air filter will restrict air flow to the engine and make it difficult to start.

How to do if the Stihl 261 車輪が遅い?

Stihl MS で問題が発生している場合 261 チェーンソー, there are a few things that you can do to get it working again. One common issue that people experience with their chainsaw is a slow wheel. If the wheel is not spinning fast enough, it will cause the chain to become tangled and eventually stop working altogether. There are a few easy fixes for this issue: 

1. チェーンの張りを確認する. The chain should be tight against the bar but not so tight that it’s difficult to turn. Over-tightening the chain can cause it to break, so make sure it’s just snug enough.
2. Clean and lubricate the wheel bearings. These will wear over time and can lead to the wheel becoming sluggish. Use a quality oil such as Stihl Chain Lube or WD-40 and work it into each bearing cap until they are fully coated.
3. Replace the wheel if necessary. If debris has built up on the hub or inside of the rim, this will cause difficulty in spinning the wheel and may necessitate replacement.

How to do if the chain of Stihl MS 261 緩みやすい?

Stihl MS の場合 261 chain is loose, there are a few things you can do to fix it. 初め, チェーンの張りをチェック. チェーンが緩すぎる場合, it will need to be tightened. これをする, use the chain tensioner to turn the tensioning screw clockwise until the chain is tight.

If the chain is still loose after tensioning it, you may need to adjust the bar clamp. これをする, loosen the bar clamp bolts and slide the bar clamp forward or backward until the chain is tight. それで, retighten the bar clamp bolts.

If you still can’t get the chain tight, you may need to replace the bar clamp. これをする, remove the old bar clamp and install a new one in the same position. それで, follow the steps above to adjust the new bar clamp.

終わり

この記事が、Stihl MS で発生する可能性のある潜在的な問題をよりよく理解するのに役立つことを願っています。 261. いつものように, 自分で修理を試みる前に、専門家に相談することが重要です. でも, この記事により、何を探すべきか、最も一般的な問題のいくつかを修正する方法について理解を深めていただければ幸いです。.