Stihl MS 361 Algeng vandamál og ráðleggingar um bilanaleit

The Stihl MS 361 is a chainsaw that is popular among professional woodsmen. Hins vegar, it has its share of problems and troubleshooting tips. Keep these in mind when using the chainsaw, and you should be able to enjoy the tool without any issues.

Problems and Fixes

Stihl MS 361: Ekki að byrja

When your Stihl MS 361 keðjusög fer ekki í gang, there are several things you can check. Fyrst, make sure that there is gas in the tank and that the tank is not empty. Næst, check the oil level in the chainsaw. Ef olíustigið er lágt, add more oil to the chainsaw. Næst, check the spark plug to make sure it is clean and in good condition.

If the spark plug is dirty or damaged, replace it with a new one. Loksins, check the air filter to make sure it is clean and in good condition. If the air filter is dirty or damaged, replace it with a new one.

Stihl MS 361: Hátt hljóð

If you’re experiencing a loud noise from your Stihl MS 361 keðjusög, there are likely some common problems and troubleshooting tips that can help.

  1. Fyrst, make sure the chain is tight and properly lubricated. Með tímanum, the chain can become dry and noisy. Auk þess, keep an eye on the oil level – if it’s getting low, add more oil before using the chainsaw.
  2. Næst, it might be necessary to clean the carburetor or air filter. These areas can collect debris and gunk over time, which will cause a loud noise and decrease gas flow.
  3. Loksins, check to see if there’s anything caught in the chain or gearbox – this could be causing excessive noise or even paralysis of one of the saw’s gears.

Stihl MS 361: Hæg hjól

Whenyour Stihl MS 361 is having slow wheels, there are a few things you can do to troubleshoot and fix the issue.

Fyrst, make sure the chainshaft is in good condition; if it is not, it may need to be serviced. Auk þess, check the air pressure in the carbs and valve stem gaskets; if it is low, the carb may need to be replaced or adjusted. Loksins, make sure the battery is charged up and ready to go; if it has not been used in a while, it may need to be checked for deterioration.

Stihl MS 361: Suddenly dies while cutting

There are a few things that could be causing your Stihl MS 361 to die while cutting. Let’s take a look at a few of the most common causes.

  1. Dirty air filter. One of the most common reasons why your Stihl MS 361 might be dying while cutting is because the air filter is dirty. A dirty air filter can restrict air flow to the engine, causing it to overheat and eventually shut down.
  2. Old or damaged spark plug. Another common reason for your chain saw to die while cutting is an old or damaged spark plug. A spark plug that is too old or damaged can lose its ability to create a spark, which is necessary for the engine to run.
  3. Low oil level. If the oil level in your chain saw is low, it can cause the engine to seize up and eventually die. Make sure to check the oil level regularly and top it off if necessary.

Stihl MS 361: Engine loses power gradually

Ef Stihl MS 361 engine loses power gradually, it’s likely that something is causing the power to go out. Here are some tips to help troubleshoot this issue and find the fix:

  1. Check the air filter and oil level. If your air filter is low or has not been changed in a while, it may be causing the engine to lose power. The oil level should also be checked, as some engines require more oil than others when starting up.
  2. Check the fuel system. If you’re seeing any issues with your fuel system, it may be causing the engine to lose power gradually. A low fuel level can cause a stumble as you start up the engine, while a dirty fuel line can cause difficulties starting or running on startup.
  3. Look for any possible causes of this issue.

Stihl MS 361: The chain tends to be loose

If your chainsaw chain tends to be loose, there are a few things you can do to troubleshoot the issue.

Fyrst, make sure that the chain is properly lubricated. Næst, try increasing the tension on the chain by using a tool such as a wrench or plier. Loksins, if all of these measures do not help, you may need to replace the chain.

Stihl MS 361: Oiler on chainsaw is not working

For you’re having trouble with your Stihl MS 361 fuel injector on the chainsaw, here are some tips to help you out.

Fyrst, make sure that the engine is running correctly and that the chain saw is properly configured. If either of those things are not happening, then it’s likely that your fuel injector is not working properly. Try turning the injector key in order to check if it’s still working. Ef það er ekki, then you may need to replace the injector or have it serviced.

Stihl MS 361

Algengar spurningar

When did the Stihl MS361 come out?

Stihl MS 361 was released in 2004 and was a very popular model due to its combination of power and features. It quickly became one of the most popular models in the Stihl range.

What CC is a Stihl MS361?

MS 361 er 59 cc Stihl chainsaw. It is a powerful saw that is used for a variety of tasks, including felling trees, skera eldivið, and clearing brush. MS 361 is a durable saw that is built to last. It features a durable engine, a long-lasting bar and chain, and a host of other features that make it a top choice for those who need a reliable and powerful chainsaw.

What’s the Stihl MS361 specification?

  • Tilfærsla: 59 cm³
  • Afköst: 3,4/4,6 kW/bhp
  • Þyngd: 5,6 kg
  • Afl/þyngd hlutfall: 1,6 kg/kW
  • Hljóðþrýstingsstig: 101 dB(A)
  • Hljóðstyrkur: 114 dB(A)
  • Titringsstig til vinstri/hægri: 2,9/3,6 m/s²
  • Saga keðjuhæð: 3/8″

Stihl MS 361

How many horsepower does a Stihl MS361 have?

Stihl MS 361 is a powerful chainsaw that is capable of delivering up to 6.3 hestöfl. This chainsaw is designed for heavy-duty use and can handle tough cutting jobs. It is also equipped with a number of features that make it easy to use, including an adjustable oil pump, an automatic chain tensioner, and an ergonomic handle.

How much does a Stihl 361 þyngd?

MS 361 weighs in at around 11.5 pounds without the bar and chain. With the bar and chain, the saw weighs around 13.5 punda. Svo, if you’re looking for a powerful saw that won’t weigh you down, MS 361 er frábær kostur.

What chain does the Stihl 361 have from the factory?

Stihl MS 361 has a chain from the factory that is part of the same manufacturing process as other Stihl models. This chain is used to tighten the chainsaw chain and makes it easier to operate the saw.

How big of a bar can you put on a Stihl 361?

Stihl MS 361 can accommodate bars up to 24 tommur á lengd. This saw is designed for medium to heavy-duty cutting applications, so a longer bar will enable it to handle larger and more challenging projects. If you frequently tackle big jobs, consider investing in a saw with a longer bar to make your work easier.

What’s the Stihl 361 max bar length?

Stihl MS 361 is a powerful and versatile saw that can handle a variety of tasks. It is a popular choice for professionals and serious hobbyists alike. MS 361 has a maximum bar length of 24 tommur, making it a good choice for larger projects. It is also a very popular saw for felling trees.

How much is a MS 361?

MS 361 has a list price of $500, but it can often be found for less than that.

Where to find MS 361 til sölu?

Your best bet is to check online retailers or auction sites. You may be able to find a good deal on a used model, but it’s important to make sure that the saw is in good condition before you purchase it. It’s also a good idea to read reviews of the saw before you buy, to get an idea of what other users think of it.

Does the MS 361 come with a case?

Stihl MS 361 does come with a case. This is a great feature because it means that you can keep your chainsaw protected when you are not using it. The case is also great for storing your chainsaw in when you are not using it.

Stihl MS 361

How to Guides

Hvernig á að endurstilla Stihl MS 361?

  1. Fyrst, you will need to find the spark plug.
  2. Næst, you will need to remove the spark plug and clean it.
  3. Loksins, you will need to replace the spark plug and start the chainsaw.

Hvernig á að kvarða Stihl MS 361?

Til að gera þetta, you’ll need to adjust the screws on the carburetor. The carburetor adjustment screws are located on the side of the carburetor. The screw labeled “L” is the low-speed adjustment screw, and the screw labeled “H” is the high-speed adjustment screw.

To adjust the carburetor, first start by turning both screws all the way in. Þá, turn the low-speed screw out 1 1/2 turns. Næst, turn the high-speed screw out 1 1/4 turns. If your chainsaw is still running too lean or too rich, you may need to adjust the screws again. Keep adjusting the screws until the chainsaw is running properly.

Hvernig á að stilla karburatorinn á Stihl MS 361?

Here are some tips on how to do this:

  1. Remove the air filter cover and the air filter.
  2. Finndu stillingarskrúfurnar á karburaranum á hliðinni á karburaranum.
  3. Turn the “L” screw clockwise until it is tight.
  4. Turn the “H” screw counterclockwise until it is tight.
  5. Replace the air filter and the air filter cover.
  6. Ræstu keðjusögina og láttu hana ganga í lausagangi í nokkrar mínútur.
  7. If the chainsaw is still not running properly, repeat steps 3-5.

How to replace bar oil pump for Stihl MS 361?

Here are some tips on how to replace a bar oil pump for your Stihl MS 361:

  1. Look for a reputable shop to do the work.
  2. Be sure you have the correct parts in hand before starting work.
  3. Follow the shop’s directions carefully, as they may vary depending on the specific model of Stihl MS 361 you’re working on.

How to adjust the chain tensioner on Stihl MS 361?

There are a few steps you can take to adjust the tensioner:

  1. Remove the chainsaw’s guide bar and chain.
  2. Locate the tensioner adjustment screw on the side of the chainsaw.
  3. Turn the tensioner adjustment screw clockwise to tighten the tensioner, or counterclockwise to loosen it.
  4. Replace the guide bar and chain, and test the chainsaw to see if the noise has been reduced.

Niðurstaða

Að lokum, if you have any of the common problems with the Stihl MS 361 saw, it is always best to consult with a professional. There are some specific tips and troubleshooting tips that can help to solve many of those problems.