U ovom članku, istražit ćemo uobičajene probleme koji se mogu pojaviti sa Stihlom 088 chainsaw and provide practical solutions to address them. Whether you are experiencing difficulty starting the chainsaw, encountering issues like flooding or loud noise, or facing sudden stops while cutting, we have got you covered. Let’s go on the post about Stihl 088 Problemi to help you with your 088 motorna pila!

Stihl 088 Problem Table

Stihl 088 Not To Start

Common Causes

• Začepljen filter goriva: A clogged fuel filter can prevent the proper flow of fuel to the engine, causing it not to start.
• Neispravna svjećica: A faulty spark plug can result in a weak or no spark, making it difficult for the engine to start.
• Prljavi filter zraka: A dirty air filter can restrict airflow to the engine, leading to starting issues.

Kako popraviti

1. Clean or replace the fuel filter: Locate the fuel filter and inspect it for any dirt or debris. If it is clogged, clean it with compressed air or replace it with a new one.
2. Check and clean/replace the spark plug: Remove the spark plug and inspect it for signs of wear or damage. Clean it using a wire brush or replace it if necessary.
3. Očistite ili zamijenite filtar za zrak: Remove the air filter and clean it with compressed air or replace it if it is too dirty. A clean air filter ensures proper airflow to the engine.

Stihl 088 Flooding

Common Causes

• Malfunctioning carburetor: A malfunctioning carburetor can cause an excessive amount of fuel to enter the engine, leading to flooding.
• Improper choke operation: If the choke is not operated correctly, it can cause an excessive amount of fuel to enter the engine, resulting in flooding.

Kako popraviti

1. Podesite postavke rasplinjača: Consult the owner’s manual for instructions on how to adjust the carburetor settings. Properly adjusting the carburetor can help prevent flooding.
2. Ensure proper choke operation: Familiarize yourself with the correct choke operation as specified in the owner’s manual. Make sure to follow the proper steps when starting the chainsaw to avoid flooding.

Stihl 088 Glasna buka

Common Causes

• Worn-out chain: A worn-out chain can produce loud noises during operation, indicating that it needs to be replaced.
• Loose or damaged muffler: A loose or damaged muffler can cause rattling or loud noises during operation.
• Loose bolts: Loose bolts on the chainsaw can result in vibrations and loud noises.

Kako popraviti

1. Replace the chain if worn out: Inspect the chain for signs of wear such as dull teeth or excessive stretching. If it is worn out, replace it with a new one to reduce noise.
2. Tighten or replace the muffler: Check the muffler for any looseness or damage. Tighten any loose bolts or replace the muffler if necessary.
3. Tighten any loose bolts: Examine the chainsaw for any loose bolts or screws. Use the appropriate tools to tighten them and ensure they are secure.

Stihl 088 Spori kotači

Common Causes

• Worn-out drive belt: A worn-out drive belt can cause the wheels to move slowly or slip, resulting in reduced cutting efficiency.
• Low tire pressure: Insufficient tire pressure can lead to sluggish wheel movement and hinder the chainsaw’s performance.
• Dirt or debris in the wheels: Accumulated dirt, krhotine, or sawdust in the wheels can impede their rotation, causing them to slow down.

Kako popraviti

1. Check and replace the drive belt if necessary: Examine the drive belt for signs of wear or damage. If it appears worn out or shows any cracks, replace it with a new one according to the manufacturer’s instructions.
2. Inflate the tires to the recommended pressure: Consult the owner’s manual for the recommended tire pressure. Use a tire pressure gauge to check the current pressure and inflate the tires to the appropriate level if needed.
3. Clean the wheels: Remove any accumulated dirt, krhotine, or sawdust from the wheels. Use a brush or compressed air to clean them thoroughly. Ensure that the wheels can rotate freely without any obstructions.

Stihl 088 Suddenly Stop While Cutting

Common Causes

• Problemi s opskrbom gorivom: Insufficient fuel flow or a clogged fuel line can cause the engine to stop abruptly while cutting.
• Pregrijavanje: Continuous use of the chainsaw without giving it sufficient breaks can lead to overheating, triggering an automatic shutdown mechanism.
• Faulty ignition system: A malfunctioning ignition system, such as a faulty spark plug or ignition coil, can cause the engine to stop unexpectedly during operation.

Kako popraviti

1. Provjerite dovod goriva: Ensure that there is enough fuel in the tank. Inspect the fuel line for any blockages or kinks. Ako je potrebno, clean or replace the fuel line to ensure proper fuel flow.
2. Avoid overheating: Take breaks during prolonged use to allow the chainsaw’s engine to cool down. Monitor the engine temperature and avoid operating the chainsaw beyond its recommended continuous usage time.
3. Pregledajte sustav paljenja: Check the spark plug for signs of wear or damage. Replace it if necessary. Dodatno, inspect the ignition coil and wiring for any faults or loose connections. Address any issues with the ignition system accordingly.

Stihl 088 Engine Loses Power Gradually

Common Causes

• Prljav ili začepljen filter zraka: A dirty air filter can restrict airflow to the engine, causing it to lose power gradually.
• Problemi s mješavinom goriva: If the fuel mixture is too rich or lean, it can affect the engine’s performance and cause it to lose power over time.
• Carbon buildup in the exhaust port or muffler: Tijekom vremena, carbon deposits can accumulate in the exhaust system, restricting the flow of exhaust gases and reducing engine power.

Kako popraviti

1. Očistite ili zamijenite filtar za zrak: Remove the air filter and clean it with compressed air or replace it if it’s too dirty. A clean air filter will ensure proper airflow to the engine.
2. Check and adjust the fuel mixture: Consult the owner’s manual for instructions on how to adjust the fuel mixture. If the mixture is off, adjust it accordingly to achieve the correct ratio.
3. Clean the exhaust port and muffler: Remove the muffler and inspect it for carbon buildup. Clean any deposits using a wire brush or a suitable solvent. Ensure that the exhaust port is also clear of carbon deposits.

Stihl 088 The Chain Tends To Be Loose

Common Causes

• Worn-out or stretched chain: Tijekom vremena, the chain on the Stihl 088 chainsaw can wear out or stretch, causing it to become loose during operation.
• Improper tensioning: Incorrectly tensioned chains can lead to them becoming loose during use.
• Damaged or worn sprocket: A damaged or worn sprocket can cause the chain to slip and become loose.

Kako popraviti

1. Zamijenite lanac: If the chain is worn out or stretched, it is best to replace it with a new one. Follow the manufacturer’s instructions for replacing the chain.
2. Properly tension the chain: Adjust the tension of the chain according to the manufacturer’s recommendations. Use a tensioning tool to achieve the correct tension.
3. Inspect and replace the sprocket if necessary: Examine the sprocket for any signs of damage or wear. If it is damaged, zamijenite ga novim.

Stihl 088 Oiler On Chainsaw Is Not Working

Common Causes

• Začepljeni uljni kanali: Tijekom vremena, oil channels in the chainsaw can become clogged with debris, preventing proper oil flow to the bar and chain.
• Neispravna pumpa za ulje: A malfunctioning oil pump can result in inadequate lubrication of the bar and chain.
• Incorrect oil viscosity: Using the wrong type of oil or an incorrect viscosity can affect the performance of the oiler.

Kako popraviti

• Clean the oil channels: Remove the guide bar and clean the oil channels using a small brush or compressed air. Ensure that there are no obstructions blocking the oil flow.
• Check and replace the oil pump: Inspect the oil pump for any signs of damage or wear. If it is faulty, zamijenite ga novim.
• Use the recommended oil: Consult the owner’s manual for the recommended oil type and viscosity. Ensure that you are using the correct oil to ensure proper lubrication.

Zaključak

Zapamtiti, when dealing with any issues related to your Stihl 088 motorna pila, it is important to prioritize safety and follow the manufacturer’s guidelines. While these troubleshooting steps can help resolve many common problems, if you are unsure or uncomfortable performing any repairs or adjustments yourself, it is always recommended to seek professional assistance.