Cov Stihl MS 361 is a chainsaw that is popular among professional woodsmen. Txawm li cas los, it has its share of problems and troubleshooting tips. Keep these in mind when using the chainsaw, and you should be able to enjoy the tool without any issues.

Problems and Fixes

Stihl MS 361: Not to start

When your Stihl MS 361 chainsaw yuav tsis pib, there are several things you can check. Ua ntej, make sure that there is gas in the tank and that the tank is not empty. Tom ntej no, check the oil level in the chainsaw. Yog cov roj theem qis, add more oil to the chainsaw. Tom ntej no, check the spark plug to make sure it is clean and in good condition.

If the spark plug is dirty or damaged, replace it with a new one. Thaum kawg, check the air filter to make sure it is clean and in good condition. If the air filter is dirty or damaged, replace it with a new one.

Stihl MS 361: Loud noise

If you’re experiencing a loud noise from your Stihl MS 361 chainsaw, there are likely some common problems and troubleshooting tips that can help.

1. Ua ntej, make sure the chain is tight and properly lubricated. Over time, the chain can become dry and noisy. Ntxiv thiab, keep an eye on the oil level – if it’s getting low, add more oil before using the chainsaw.
2. Tom ntej no, it might be necessary to clean the carburetor or air filter. These areas can collect debris and gunk over time, which will cause a loud noise and decrease gas flow.
3. Thaum kawg, check to see if there’s anything caught in the chain or gearbox – this could be causing excessive noise or even paralysis of one of the saw’s gears.

Stihl MS 361: Slow wheels

Whenyour Stihl MS 361 is having slow wheels, there are a few things you can do to troubleshoot and fix the issue.

Ua ntej, make sure the chainshaft is in good condition; if it is not, it may need to be serviced. Ntxiv thiab, check the air pressure in the carbs and valve stem gaskets; if it is low, the carb may need to be replaced or adjusted. Thaum kawg, make sure the battery is charged up and ready to go; if it has not been used in a while, it may need to be checked for deterioration.

Stihl MS 361: Suddenly dies while cutting

There are a few things that could be causing your Stihl MS 361 to die while cutting. Let’s take a look at a few of the most common causes.

1. Dirty air filter. One of the most common reasons why your Stihl MS 361 might be dying while cutting is because the air filter is dirty. A dirty air filter can restrict air flow to the engine, causing it to overheat and eventually shut down.
2. Old or damaged spark plug. Another common reason for your chain saw to die while cutting is an old or damaged spark plug. A spark plug that is too old or damaged can lose its ability to create a spark, which is necessary for the engine to run.
3. Low oil level. If the oil level in your chain saw is low, it can cause the engine to seize up and eventually die. Make sure to check the oil level regularly and top it off if necessary.

Stihl MS 361: Engine loses power gradually

Yog koj tus Stihl MS 361 engine loses power gradually, it’s likely that something is causing the power to go out. Here are some tips to help troubleshoot this issue and find the fix:

1. Check the air filter and oil level. If your air filter is low or has not been changed in a while, it may be causing the engine to lose power. The oil level should also be checked, as some engines require more oil than others when starting up.
2. Check the fuel system. If you’re seeing any issues with your fuel system, it may be causing the engine to lose power gradually. A low fuel level can cause a stumble as you start up the engine, while a dirty fuel line can cause difficulties starting or running on startup.
3. Look for any possible causes of this issue.

Stihl MS 361: The chain tends to be loose

If your chainsaw chain tends to be loose, there are a few things you can do to troubleshoot the issue.

Ua ntej, make sure that the chain is properly lubricated. Tom ntej no, try increasing the tension on the chain by using a tool such as a wrench or plier. Thaum kawg, if all of these measures do not help, you may need to replace the chain.

Stihl MS 361: Oiler on chainsaw is not working

For you’re having trouble with your Stihl MS 361 fuel injector on the chainsaw, here are some tips to help you out.

Ua ntej, make sure that the engine is running correctly and that the chain saw is properly configured. If either of those things are not happening, then it’s likely that your fuel injector is not working properly. Try turning the injector key in order to check if it’s still working. Yog tsis yog, then you may need to replace the injector or have it serviced.

FAQ

When did the Stihl MS361 come out?

Stihl MS 361 was released in 2004 and was a very popular model due to its combination of power and features. It quickly became one of the most popular models in the Stihl range.

What CC is a Stihl MS361?

Cov MS 361 is a 59 cc Stihl chainsaw. It is a powerful saw that is used for a variety of tasks, including felling trees, txiav ntoo, and clearing brush. Cov MS 361 is a durable saw that is built to last. It features a durable engine, a long-lasting bar and chain, and a host of other features that make it a top choice for those who need a reliable and powerful chainsaw.

What’s the Stihl MS361 specification？

• Kev khiav tawm: 59 cm3 ua
• Lub zog tso zis: 3,4/4,6 PEB / kW
• Qhov hnyav: 5,6 kg
• Lub zog-rau-qhov hnyav piv: 1,6 kg/kW
• Suab siab theem: 101 dB(A)
• Suab zog theem: 114 dB(A)
• Kev vibration theem sab laug / sab xis: 2,9/3,6 m/s² os
• Saw saw caj dab: 3/8″

How many horsepower does a Stihl MS361 have?

Stihl MS 361 yog ib tug muaj zog chainsaw uas muaj peev xwm xa mus txog 6.3 zog. This chainsaw is designed for heavy-duty use and can handle tough cutting jobs. It is also equipped with a number of features that make it easy to use, including an adjustable oil pump, an automatic chain tensioner, and an ergonomic handle.

How much does a Stihl 361 hnyav?

Cov MS 361 weighs in at around 11.5 pounds without the bar and chain. With the bar and chain, the saw weighs around 13.5 phaus. Yog li, if you’re looking for a powerful saw that won’t weigh you down, cov MS 361 yog ib qho kev xaiv zoo.

What chain does the Stihl 361 have from the factory?

Stihl MS 361 has a chain from the factory that is part of the same manufacturing process as other Stihl models. This chain is used to tighten the chainsaw chain and makes it easier to operate the saw.

Loj npaum li cas ntawm ib lub bar koj tuaj yeem tso rau ntawm Stihl 361?

Stihl MS 361 can accommodate bars up to 24 ntiv tes ntev. This saw is designed for medium to heavy-duty cutting applications, so a longer bar will enable it to handle larger and more challenging projects. If you frequently tackle big jobs, consider investing in a saw with a longer bar to make your work easier.

What’s the Stihl 361 max bar length?

Stihl MS 361 yog lub zog muaj zog thiab ntau yam pom uas tuaj yeem ua haujlwm ntau yam haujlwm. It is a popular choice for professionals and serious hobbyists alike. Cov MS 361 has a maximum bar length of 24 ntiv tes, making it a good choice for larger projects. It is also a very popular saw for felling trees.

How much is a MS 361?

Cov MS 361 has a list price of $500, but it can often be found for less than that.

Where to find MS 361 muag?

Your best bet is to check online retailers or auction sites. You may be able to find a good deal on a used model, but it’s important to make sure that the saw is in good condition before you purchase it. It’s also a good idea to read reviews of the saw before you buy, to get an idea of what other users think of it.

Does the MS 361 come with a case?

Stihl MS 361 does come with a case. This is a great feature because it means that you can keep your chainsaw protected when you are not using it. The case is also great for storing your chainsaw in when you are not using it.

How to Guides

How to reset the Stihl MS 361?

1. Ua ntej, you will need to find the spark plug.
2. Tom ntej no, you will need to remove the spark plug and clean it.
3. Thaum kawg, you will need to replace the spark plug and start the chainsaw.

How to calibrate a Stihl MS 361?

Ua li no, you’ll need to adjust the screws on the carburetor. The carburetor adjustment screws are located on the side of the carburetor. The screw labeled “L” is the low-speed adjustment screw, and the screw labeled “H” is the high-speed adjustment screw.

Txhawm rau kho cov carburetor, first start by turning both screws all the way in. Ces, turn the low-speed screw out 1 1/2 tig. Tom ntej no, turn the high-speed screw out 1 1/4 tig. If your chainsaw is still running too lean or too rich, you may need to adjust the screws again. Keep adjusting the screws until the chainsaw is running properly.

How to adjust the carburetor on a Stihl MS 361?

Here are some tips on how to do this:

1. Remove the air filter cover and the air filter.
2. Locate the carburetor adjustment screws on the side of the carburetor.
3. Turn the “L” screw clockwise until it is tight.
4. Turn the “H” screw counterclockwise until it is tight.
5. Replace the air filter and the air filter cover.
6. Start the chainsaw and let it idle for a few minutes.
7. If the chainsaw is still not running properly, repeat steps 3-5.

How to replace bar oil pump for Stihl MS 361?

Here are some tips on how to replace a bar oil pump for your Stihl MS 361:

1. Look for a reputable shop to do the work.
2. Be sure you have the correct parts in hand before starting work.
3. Follow the shop’s directions carefully, as they may vary depending on the specific model of Stihl MS 361 you’re working on.

How to adjust the chain tensioner on Stihl MS 361?

There are a few steps you can take to adjust the tensioner:

1. Remove the chainsaw’s guide bar and chain.
2. Locate the tensioner adjustment screw on the side of the chainsaw.
3. Turn the tensioner adjustment screw clockwise to tighten the tensioner, or counterclockwise to loosen it.
4. Replace the guide bar and chain, and test the chainsaw to see if the noise has been reduced.

Xaus

Hauv kev xaus, if you have any of the common problems with the Stihl MS 361 saw, nws yog ib txwm zoo mus sab laj nrog ib tug kws tshaj lij. There are some specific tips and troubleshooting tips that can help to solve many of those problems.