Det Stihl MS 361 er en motorsav, der er populær blandt professionelle skovmænd. Imidlertid, it has its share of problems and troubleshooting tips. Keep these in mind when using the chainsaw, and you should be able to enjoy the tool without any issues.
Problemer og rettelser
Stihl MS 361: Not to start
When your Stihl MS 361 motorsaven starter ikke, there are several things you can check. Først, make sure that there is gas in the tank and that the tank is not empty. Næste, check the oil level in the chainsaw. Hvis oliestanden er lav, add more oil to the chainsaw. Næste, check the spark plug to make sure it is clean and in good condition.
If the spark plug is dirty or damaged, erstatte den med en ny. Langt om længe, check the air filter to make sure it is clean and in good condition. If the air filter is dirty or damaged, erstatte den med en ny.
Stihl MS 361: Loud noise
If you’re experiencing a loud noise from your Stihl MS 361 kædesav, there are likely some common problems and troubleshooting tips that can help.
- Først, make sure the chain is tight and properly lubricated. Over tid, the chain can become dry and noisy. Derudover, keep an eye on the oil level – if it’s getting low, add more oil before using the chainsaw.
- Næste, it might be necessary to clean the carburetor or air filter. These areas can collect debris and gunk over time, which will cause a loud noise and decrease gas flow.
- Langt om længe, check to see if there’s anything caught in the chain or gearbox – this could be causing excessive noise or even paralysis of one of the saw’s gears.
Stihl MS 361: Slow wheels
Whenyour Stihl MS 361 is having slow wheels, there are a few things you can do to troubleshoot and fix the issue.
Først, make sure the chainshaft is in good condition; if it is not, it may need to be serviced. Derudover, check the air pressure in the carbs and valve stem gaskets; if it is low, the carb may need to be replaced or adjusted. Langt om længe, make sure the battery is charged up and ready to go; if it has not been used in a while, it may need to be checked for deterioration.
Stihl MS 361: Suddenly dies while cutting
There are a few things that could be causing your Stihl MS 361 to die while cutting. Let’s take a look at a few of the most common causes.
- Dirty air filter. One of the most common reasons why your Stihl MS 361 might be dying while cutting is because the air filter is dirty. Et snavset luftfilter kan begrænse luftstrømmen til motoren, causing it to overheat and eventually shut down.
- Old or damaged spark plug. Another common reason for your chain saw to die while cutting is an old or damaged spark plug. A spark plug that is too old or damaged can lose its ability to create a spark, which is necessary for the engine to run.
- Lavt olieniveau. If the oil level in your chain saw is low, it can cause the engine to seize up and eventually die. Make sure to check the oil level regularly and top it off if necessary.
Stihl MS 361: Engine loses power gradually
Hvis din Stihl MS 361 engine loses power gradually, it’s likely that something is causing the power to go out. Here are some tips to help troubleshoot this issue and find the fix:
- Check the air filter and oil level. If your air filter is low or has not been changed in a while, it may be causing the engine to lose power. The oil level should also be checked, as some engines require more oil than others when starting up.
- Check the fuel system. If you’re seeing any issues with your fuel system, it may be causing the engine to lose power gradually. A low fuel level can cause a stumble as you start up the engine, while a dirty fuel line can cause difficulties starting or running on startup.
- Look for any possible causes of this issue.
Stihl MS 361: The chain tends to be loose
If your chainsaw chain tends to be loose, der er et par ting, du kan gøre for at fejlfinde problemet.
Først, sørg for, at kæden er ordentligt smurt. Næste, try increasing the tension on the chain by using a tool such as a wrench or plier. Langt om længe, if all of these measures do not help, du skal muligvis udskifte kæden.
Stihl MS 361: Oiler on chainsaw is not working
For you’re having trouble with your Stihl MS 361 fuel injector on the chainsaw, here are some tips to help you out.
Først, make sure that the engine is running correctly and that the chain saw is properly configured. If either of those things are not happening, then it’s likely that your fuel injector is not working properly. Try turning the injector key in order to check if it’s still working. Hvis det ikke er, then you may need to replace the injector or have it serviced.
FAQ
When did the Stihl MS361 come out?
Stihl MS 361 was released in 2004 and was a very popular model due to its combination of power and features. It quickly became one of the most popular models in the Stihl range.
What CC is a Stihl MS361?
MS 361 er en 59 cc Stihl chainsaw. It is a powerful saw that is used for a variety of tasks, herunder fældning af træer, skære brænde, og rydningsbørste. MS 361 is a durable saw that is built to last. It features a durable engine, a long-lasting bar and chain, and a host of other features that make it a top choice for those who need a reliable and powerful chainsaw.
What’s the Stihl MS361 specification?
- Forskydning: 59 cm³
- Effektudgang: 3,4/4,6 kW/bhk
- Vægt: 5,6 kg
- Kraft-til-vægt-forhold: 1,6 kg/kW
- Lydtryksniveau: 101 dB(EN)
- Lydeffektniveau: 114 dB(EN)
- Vibrationsniveau venstre/højre: 2,9/3,6 m/s²
- Savkædestigning: 3/8″
How many horsepower does a Stihl MS361 have?
Stihl MS 361 is a powerful chainsaw that is capable of delivering up to 6.3 hestekræfter. This chainsaw is designed for heavy-duty use and can handle tough cutting jobs. It is also equipped with a number of features that make it easy to use, inklusive en justerbar oliepumpe, en automatisk kædestrammer, and an ergonomic handle.
Hvor meget koster en Stihl 361 vægt?
MS 361 weighs in at around 11.5 pund uden sværd og kæde. With the bar and chain, the saw weighs around 13.5 pund. Så, if you’re looking for a powerful saw that won’t weigh you down, MS 361 er en god mulighed.
Hvilken kæde gør Stihl 361 har fra fabrikken?
Stihl MS 361 has a chain from the factory that is part of the same manufacturing process as other Stihl models. This chain is used to tighten the chainsaw chain and makes it easier to operate the saw.
Hvor stor en bar kan man sætte på en Stihl 361?
Stihl MS 361 can accommodate bars up to 24 inches i længden. This saw is designed for medium to heavy-duty cutting applications, so a longer bar will enable it to handle larger and more challenging projects. If you frequently tackle big jobs, consider investing in a saw with a longer bar to make your work easier.
Hvad er Stihl 361 max stanglængde?
Stihl MS 361 er en kraftfuld og alsidig sav, der kan klare en række forskellige opgaver. It is a popular choice for professionals and serious hobbyists alike. MS 361 has a maximum bar length of 24 tommer, making it a good choice for larger projects. It is also a very popular saw for felling trees.
Hvor meget koster en MS 361?
MS 361 has a list price of $500, but it can often be found for less than that.
Where to find MS 361 til salg?
Your best bet is to check online retailers or auction sites. You may be able to find a good deal on a used model, but it’s important to make sure that the saw is in good condition before you purchase it. It’s also a good idea to read reviews of the saw before you buy, to get an idea of what other users think of it.
Gør MS 361 kom med en sag?
Stihl MS 361 does come with a case. This is a great feature because it means that you can keep your chainsaw protected when you are not using it. The case is also great for storing your chainsaw in when you are not using it.
Sådan guider du
Sådan nulstiller du Stihl MS 361?
- Først, you will need to find the spark plug.
- Næste, you will need to remove the spark plug and clean it.
- Langt om længe, you will need to replace the spark plug and start the chainsaw.
Sådan kalibreres en Stihl MS 361?
At gøre dette, you’ll need to adjust the screws on the carburetor. The carburetor adjustment screws are located on the side of the carburetor. The screw labeled “L” is the low-speed adjustment screw, and the screw labeled “H” is the high-speed adjustment screw.
To adjust the carburetor, first start by turning both screws all the way in. Derefter, turn the low-speed screw out 1 1/2 drejninger. Næste, turn the high-speed screw out 1 1/4 drejninger. If your chainsaw is still running too lean or too rich, you may need to adjust the screws again. Keep adjusting the screws until the chainsaw is running properly.
Sådan justeres karburatoren på en Stihl MS 361?
Here are some tips on how to do this:
- Remove the air filter cover and the air filter.
- Locate the carburetor adjustment screws on the side of the carburetor.
- Turn the “L” screw clockwise until it is tight.
- Turn the “H” screw counterclockwise until it is tight.
- Replace the air filter and the air filter cover.
- Start the chainsaw and let it idle for a few minutes.
- Hvis motorsaven stadig ikke kører korrekt, gentag trin 3-5.
Sådan udskiftes baroliepumpe til Stihl MS 361?
Here are some tips on how to replace a bar oil pump for your Stihl MS 361:
- Look for a reputable shop to do the work.
- Be sure you have the correct parts in hand before starting work.
- Follow the shop’s directions carefully, as they may vary depending on the specific model of Stihl MS 361 you’re working on.
Sådan justeres kædestrammeren på Stihl MS 361?
There are a few steps you can take to adjust the tensioner:
- Remove the chainsaw’s guide bar and chain.
- Locate the tensioner adjustment screw on the side of the chainsaw.
- Turn the tensioner adjustment screw clockwise to tighten the tensioner, eller mod uret for at løsne den.
- Replace the guide bar and chain, and test the chainsaw to see if the noise has been reduced.
Konklusion
Afslutningsvis, if you have any of the common problems with the Stihl MS 361 sav, det er altid bedst at rådføre sig med en professionel. There are some specific tips and troubleshooting tips that can help to solve many of those problems.