If you’re experiencing problems with your Stihl čs 400 motorová pila, it’s time to take it in for servicing. Here are some common problems and solutions.

Nejčastější dotazy

Kdy se Stihl čs 400 vyjít?

Stihl čs 400 saw its debut in 2017 and quickly became one of the most popular trimmers on the market. It has played an important role in the industry and forestry since it came.

Co je CC Stihl MS 400 ?

Stihl čs 400 is a gas-powered chain saw that has a 3.5 palcová řezná kapacita. Má to 66.8 cc engine and can cut through hardwood, borovice, and other types of wood.

Co je to MS 400 C-M specification?

• Přemístění: 66,8 cm³
• Výstupní výkon: 4/5,4 kW/bhp
• Hmotnost: 5,8 kg
• Poměr výkonu a hmotnosti: 1,45 kg/kW
• Hladina akustického tlaku: 107 dB(A)
• Hladina akustického výkonu: 118 dB(A)
• Úroveň vibrací vlevo/vpravo: 3,5/3,5 m/s²
• Rozteč pilového řetězu: 3/8″

Kolik koňských sil má MS 400 CM have?

Stihl čs 400 has a power rating of 410 koňská síla. This is a powerful engine that is perfect for general forestry use, dřevorytectví, and other similar uses.

How much does a MS 400 C-M weight?

Stihl čs 400 váží 5.8 kg, nebo 12.8 lbs. This weight can vary depending on the model of the saw, as well as the saw’s accessories. Například, the weight of the Stihl MS 400 with a saw chain and guide bar can range from 6.3 kg to 7.1 kg.

The weight of the saw is an important consideration for many users, as it can affect the saw’s maneuverability and ease of use. Například, a saw that is too heavy may be difficult to control, while a saw that is too light may vibrate excessively.

What chain does the MS 400 C-M have from the factory?

Stihl čs 400 comes with a 3/8″ PM3 saw chain as standard. This is a mid-range chain that is suitable for a variety of tasks, including felling small trees and cutting through branches. It is a good all-round chain that will give you good results without being too aggressive.

How big of a bar can you put on a Stihl MS400 ?

There are a few different types of bars that can be used on the Stihl MS 400. The most common type is the standard bar, which is typically between 18 a 24 palce dlouhé. The size of the bar you can use will depend on the model of the saw and the type of chain that is being used.

How much is a Stihl MS400 ?

Stihl čs 400 is a chainsaw that is popular for its powerful engine and durability. It typically retails for around $1,000, although the price may vary depending on the retailer and location.

Where to find Stihl MS 400C for sale?

Pokud hledáte Stihl MS 400 na prodej, there are a few different ways that you can find Stihl MS 400 na prodej. One way is to look online. You can find many online retailers that sell this chainsaw. Another way is to check your local hardware store or home improvement store. Many of these stores sell this chainsaw as well.

You might also be able to find a good deal on a used model if you’re willing to do a little digging. nicméně, it’s important to make sure that you’re getting a quality product, so be sure to do your research before making a purchase.

Does the Stihl MS 400C come with a case?

Stihl čs 400 is a popular lawn mower that comes with a case. The case is an important part of the machine, as it helps protect the machine from damage and makes it easier to transport. nicméně, some people have reported problems with the case.

If the case won’t close or opens suddenly, try tightening the screws that hold it together. Pokud to nefunguje, there may be a problem with the springs inside the case. Try replacing the springs if you can find them or buying a new case.

If your machine has trouble starting up, zkontrolujte, zda je v nádrži dostatek paliva. Make sure you have filled it up at least half way with gasoline before using it for the first time. If that doesn’t solve the problem, try cleaning out any debris that may be clogging up the engine’s carburetor.

Instrukce

Jak resetovat Stihl MS 400?

Pokud potřebujete resetovat Stihl MS 400, the first thing you need to do is locate the carburetor. The carburetor is located on the side of the engine, and it is responsible for regulating the air and fuel mixture that goes into the engine. Once you have located the carburetor, you need to find the adjustment screws. These screws are located on the top of the carburetor, and they are used to adjust the air and fuel mixture.

The next step is to turn the adjustment screws until the engine is running smoothly. If the engine is still running rough, you may need to increase the amount of fuel that is being delivered to the engine. Udělat toto, you will need to turn the fuel mixture screw clockwise. Jakmile motor běží hladce, you can turn the adjustment screws back to their original position.

Jak kalibrovat Stihl MS 400 CM?

It’s important to keep your Stihl MS 400 running at peak performance, and part of that is making sure it’s properly calibrated. While it’s not a difficult process, it is important to follow the steps carefully in order to get accurate results.

1. Start by consulting the owner’s manual for your specific model of Stihl MS 400. This will give you the proper settings for your saw.
2. další, use a feeler gauge to measure the gap between the saw’s piston and the cylinder wall. This measurement should be taken at the top, middle, and bottom of the piston.
3. Once you have the measurements, use a wrench to adjust the screws that hold the piston in place. The goal is to get the piston as close to the cylinder wall as possible without actually touching it.
4. Konečně, check the carburetor for proper mixture settings. This can be done by using a carburetor adjustment tool or by consulting the owner’s manual.

Following these steps will ensure that your Stihl MS 400 is properly calibrated and running at peak performance.

Jak seřídit karburátor na Stihl MS 400 CM?

Assuming you are referring to the Stihl MS 400 motorová pila, the following is a step-by-step guide on how to adjust the carburetor:

1. Locate the carburetor adjustment screws on the side of the carburetor. These are typically labeled “H” for high speed and “L” for low speed.
2. Pomocí šroubováku, otáčejte šroubem „H“ ve směru hodinových ručiček, dokud nebude pevně utažen.
3. Turn the “L” screw counter-clockwise until it is tight.
4. Nastartujte motorovou pilu a nechte ji několik minut běžet naprázdno.
5. Pokud motorová pila stále běží hrubě, turn the “H” screw counter-clockwise until it is loose. Turn the “L” screw clockwise until it is loose.
6. Opakujte kroky 2-5 dokud motorová pila neběží hladce.

Jak vyměnit olejové čerpadlo pro Stihl MS 400C ?

Za předpokladu, že máte Stihl MS 400 motorová pila, postup výměny olejového čerpadla tyče je následující:

1. Odstraňte lištu a řetěz z motorové pily.
2. Odšroubujte uzávěr olejového čerpadla lišty z těla řetězové pily.
3. Remove the old bar oil pump from the chainsaw body.
4. Install the new bar oil pump into the chainsaw body.
5. Screw the bar oil pump cap back onto the chainsaw body.
6. Znovu připevněte lištu a řetěz k motorové pile.

Odstraňování problémů

SLEČNA 400 CM: Ne začít

Pokud váš Stihl čs 400 motorová pila se nespustí, there are a few things you can do to try to fix the problem. První, check the fuel mixture to make sure it is correct. Pokud to je, then check the spark plug to see if it is fouled. Pokud to je, vyčistěte a zkuste to znovu. Pokud problém stále přetrvává, then you may need to take the chainsaw to a certified Stihl dealer for service.

SLEČNA 400 CM: Hlasitý zvuk

V této části, we’ll discuss some of the Stihl MS 400 ‘s most common noise problems and how to easily solve them.

The fan belt has come off the motor. If you’re experiencing a lot of noise from your Stihl MS 400 , chances are the fan belt has come off the motor. This is an easy fix if you have a replacement belt available: simply replace the belt and you’re back in business! If you don’t have a replacement belt handy, try gently rethreading the motor shaft using a wrench or pliers.

The carburetor needs cleaning or adjustingIf your machine is making excessive noise and doesn’t seem to be cutting as well as it used to, it may be time for the carburetor to get cleaned or adjusted. Many times, this issue can be resolved by visiting a professional mechanic who can adjust the carburetor according to your specific needs. Pokud to nefunguje, consider replacing the carburetor entirely.

SLEČNA 400 CM: Pomalá kola

Pokud váš Stihl čs 400 má pomalá kola, there are a few things you can do to speed it up. One option is to adjust the tension on the chain. This can be done by loosening the screws that hold the chain in place and then tightening or loosening the tensioner until the chain is tight or loose enough.

Another option is to adjust the fuel mixture. This can be done by adding more or less oil to the gas tank. The final option is to adjust the carburetor. This can be done by turning the screws on the carburetor until the engine runs at the desired speed.

Konec