This article will take an in-depth look at the problems associated with Stihl čs 251 C motorová pila, as well as easy solutions to fix these problems.

Stihl čs 251 C FAQs

Kdy se Stihl čs 251 C come out?

Stihl čs 251 C was released in 2014. It is a powerful and efficient chainsaw that is perfect for cutting through thick trees and logs. It has a long bar and a powerful engine, making it easy to cut through even the toughest of materials.

Co je CC Stihl MS 251 C?

Čs 251 C-BE is a mid-size saw with a powerful 45.6 cc motor. It features a low-emission engine, to help reduce your impact on the environment. It also has a tool-free chain tensioning system, making it easy to keep your chain tight and your saw running smoothly.

Co je to MS 251 C specification?

• Napájení: Source Gas
• Hmotnost pohonné hlavy: 11.5 lbs.
• Délka vodicí lišty: 18 v.
• Oilomatický řetěz: .325″RM3
• Kapacita řetězového oleje: 6.7 oz.
• Výkon motoru: 3.0 bhp
• Plná kapacita: 13.2 oz.
• Přemístění: 45.6 cc

Kolik koňských sil má MS 251 C have?

Stihl čs 251 C is a chainsaw that is often used for forestry and tree felling. It is a very powerful saw and has a lot of horsepower. In terms of exact numbers, Stihl MS 251 C has 2.6 koňská síla. This power is generated by the engine and allows the saw to cut through thick tree trunks and branches with ease.

Kolik stojí Stihl 251 C weight?

Stihl čs 251 C is a lightweight chainsaw that is easy to maneuver. To váží 11.5 liber bez lišty a řetězu, a 12.1 pounds with the bar and chain, což z ní dělá jednu z nejlehčích pil ve své třídě. Čs 251 C is also equipped with an anti-vibration system that reduces operator fatigue.

Jaký řetěz má Stihl 251 C have from the factory?

Stihl čs 251 C comes with a 3/8″ PM3 saw chain from the factory. This is a low-kickback chain that is ideal for use with this saw. Stihl čs 251 C also comes with a Picco Micro 3 (PM3) pilový řetěz. This chain is designed for use with smaller saws like the MS 251 C. It is a low-kickback chain that is safe to use.

How big of a bar can you put on a Stihl MS 251C?

If you’re looking to do some serious cutting with your Stihl MS 251 C, you’re going to need a bar that’s up to the task. The good news is that the MS 251 C can accommodate bars up to 18 palce na délku. So if you need to cut through some thick branches or fell a small tree, you’ll be able to do it with this saw. Just make sure that you’re using the correct chain and bar for the job, as using a bar that’s too long for the saw can be dangerous.

What’s the Stihl MS 251C max bar length?

Stihl čs 251 C-BE is a powerful and versatile chainsaw that can handle a variety of tasks, od kácení stromů až po ořezávání větví. It has a maximum bar length of 18 palce, which makes it ideal for larger cutting jobs. Čs 251 C-BE also has a number of features that make it easy to use, including an automatic chain oiler and a tool-free chain tensioner.

How much is a Stihl MS251 C?

Se vším, co bylo řečeno, a basic Stihl MS 251 C chain saw with a 18-inch bar and no extra features will typically cost between $300 a $350. If you want a saw with a longer bar or additional features, you can expect to pay more. Například, a saw with a 20-inch bar and an automatic chain oiler might cost around $450. Nakonec, the best way to know how much a particular saw will cost is to consult with a local dealer or retailer.

Where to find Stihl MS251 C for sale?

Pokud hledáte Stihl MS 251 C for sale, your best bet is to check out your local home improvement store. Many of these stores carry a wide variety of different brands and models of chainsaws, so you should be able to find one that meets your needs. You can also check online retailers like Amazon.com for a wide selection of chainsaws, včetně Stihl čs 251 C.

Má Stihl čs 251 C come with a case?

Stihl čs 251 C comes with a case, ale není to moc ochranné. If you’re going to be using the saw for a long time, you’ll want to get a better case. There are many options available, and the best one depends on your specific needs.

Stihl čs 251 C Intructions

1. Jak resetovat Stihl MS 251 C-BE?

První, make sure that the chainsaw is turned off. další, find the red reset button on the chainsaw. The button is located on the side of the chainsaw, near the top.

Press and hold the reset button for about three seconds. You should hear a click when the button is released. This indicates that the chainsaw has been reset.

Nyní, you’re ready to start using your chainsaw again. Thanks for reading, and we hope this blog post has been helpful.

2. Jak seřídit karburátor na Stihl MS 251 C-BE?

To adjust the carburetor on a Stihl MS251 C-BE:

1. Odpojte kabel zapalovací svíčky od zapalovací svíčky.
2. Open the fuel petcock and screw it all the way in toward the engine. If there is no fuel petcock, open the throttle all of the way using your hand.
3. Turn the choke knob counterclockwise until it stops, then turn it clockwise one notch to increase air flow. If there is no choke knob, leave it in the off position.
4. Close both spark plugs by inserting their wires back into their connectors and tighten them down with a wrench or socket.
5. Start the engine and let it warm up for a few minutes before trying to start it again; this will help purge any gas that may have accumulated in the carburetor during adjustments.

3. Jak vyměnit barové olejové čerpadlo pro Stihl MS 251 C-BE?

Pokud máte problémy s vaším Stihl MS 251 C gas or oil pump, then it is time to replace the unit. This guide will show you how to do this in both simple and easy steps.

1. První, you need to remove the cover of the machine. You will see two screws on either side of the cover. Remove these screws and unhook the cover from the machine.
2. dodatečně, you need to remove the oil pump unit from the machine. There are four screws that hold it in place. Once these screws have been removed, take off the oil pump unit. Be sure to save all of the parts so that you can reattach them correctly when replacing the pump.
3. další, you will need to purchase a new oil pump unit. Make sure that it is compatible with your Stihl MS 251 C model by checking its dimensions against those listed in this guide.
4. Once you have bought your new pump, remove the old one from your machine and install the new one in its place. Be sure to tighten all of the bolts and screws before rehooking up the cover of your machine and reinstalling it onto the body of your lawnmower.

4. Jak utažený by měl být řetěz na Stihl MS 251 C-BE?

The chain should be tight enough that the bar won’t fall off, but not so tight that it binds or makes noise. Pokud je řetěz příliš volný, it will wear down quickly and cause problems with the machine. Na druhou stranu, if the chain is too tight, it can damage components. To adjust the chain, use a screwdriver to loosen one of the screws on the front of the chain sprocket.

Stihl čs 251 C Problems

Stihl čs 251 c-be with Loud noise

Pokud váš Stihl čs 251 C is making loud noise, existuje několik věcí, které můžete udělat, abyste se pokusili problém vyřešit. První, zkontrolujte vzduchový filtr, zda je čistý. Pokud je špinavý, clean it and see if that helps. Pokud je vzduchový filtr čistý, zkontrolujte zapalovací svíčku, zda není zanesená. Pokud to je, vyčistěte a zkuste to znovu. If neither of these solutions works, you may need to take the saw to a qualified service center for further diagnosis.

Stihl čs 251 c-be with Slow wheels

Pokud máte potíže se svým Stihl MS 251 C, one possible issue is that the wheels are spinning too slowly. There are a few things you can do to try to fix this issue.

První, zkontrolujte, zda je řetěz správně namazán. If it’s not, then lubricate it according to the manufacturer’s instructions. další, check to see if the chain tension is too loose. Pokud to je, then tighten it according to the manufacturer’s instructions. If neither of those solutions solves the problem, then you may need to replace the saw’s drive sprocket. Consult the manufacturer’s instructions or a qualified repair person for more information on how to do this.

Suddenly stop while cutting with Stihl MS 251 c-be

If you’re using a Stihl MS 251 C and it suddenly stops while you’re cutting, nepanikařte. There are a few things you can check to troubleshoot the issue.

1. První, check the saw’s chain. If the chain is dull or damaged, it can cause the saw to stop. Be sure to check the chain regularly and sharpen or replace it as needed.
2. If the chain is in good condition, the next thing to check is the air filter. Znečištěný vzduchový filtr může omezit proudění vzduchu do motoru, causing the saw to stop. Clean or replace the air filter as needed.
3. Konečně, zkontrolujte palivovou směs. Pokud je palivová směs příliš bohatá nebo chudá, it can cause the saw to stop. Be sure to use the correct fuel mix for your saw.

If you can’t resolve the issue, take the saw to a qualified technician for service.

souhrn

V tomto článku, we’ve discussed some of the common issues of Stihl MS251 C-BE chainsaw and offer easy solutions. Doufejme, by reading this article you will be able to troubleshoot any issues you might encounter with your chainsaw and get it up and running like new again.