Stihl čs 661 C-M is a great chainsaw, but like all chainsaws, it can have some problems from time to time. V tomto příspěvku na blogu, we’ll take a look at some of the possible problems you might encounter with your Stihl MS 661 řetězová pila C-M, as well as some solutions to those problems.

Stihl čs 661 CM: Frequently Asked Questiuons

Kdy se Stihl čs 661 C-M come out?

Stihl čs 661 C-M was first released in 2013. It is a powerful saw that is designed for professional use. It has a lot of features that make it a great saw for those who need a powerful tool to get the job done.

Co je CC Stihl MS 661 CM?

The CC of a Stihl čs 661 CM je 91.6. This means that the saw is capable of cutting through 91.6 cubic centimeters of wood in a single minute. Čs 661 C-M is a powerful saw that is designed for professional use. It is one of the most popular saws among professional loggers and arborists.

Co je to MS 661 C-M specification?

• Přemístění: 91,1 cm³
• Výstupní výkon: 5,4/7,3 kW/bhp
• Hmotnost: 7,4 kg
• Poměr výkonu a hmotnosti: 1,4 kg/kW
• Hladina akustického tlaku: 105 dB(A)
• Hladina akustického výkonu: 118 dB(A)
• Úroveň vibrací vlevo/vpravo: 6,9/5,6 m/s²
• Rozteč pilového řetězu: 3/8″
• Typ pilového řetězu STIHL Oilomatic: Rapid Super (RS)

Kolik koňských sil má MS 661 C-M have?

Stihl čs 661 C-M is a gas-powered chain saw designed for general use. It has a peak output of 6.3 horsepower and can handle most tasks a homeowner would need it for. nicméně, there are a few problems that can occur with this saw, and some easy solutions.

Kolik stojí Stihl 661 C-M weight?

One of which is its weight; at just over 26 liber, this machine can be heavy to carry around. To help offset the weight of the MS 661 CM, many homeowners opt to use a backpack attachment or an optional wheeled cart. When using either option, it’s important to make sure the machine is properly balanced and secure so as not to cause strain on your back or arms.

Jaký řetěz má Stihl 661 C-M have from the factory?

Stihl čs 661 C-M comes with a 3/8″ PMC3 saw chain from the factory. This chain is designed for use with a saw with a guide bar that is 20″ or less in length.

How big of a bar can you put on a Stihl MS661 C-M?

The answer to this question depends on a few factors, such as the size of the saw and the type of bar you are using. Například, if you are using a 16″ bar, you could probably put a 36″ bar on a Stihl MS 661 CM. nicméně, if you are using a 20″ bar, you might be limited to a 28″ or 30″ bar.

What’s the Stihl MS661 C-M max bar length?

Čs 661 C-M has a maximum bar length of 36 palce, which means that it can handle even the most challenging tasks. If you need a saw that can handle anything, Stihl MS 661 C-M is the saw for you.

Kolik stojí Stihl MS 661 CM?

Stihl čs 661 C-M chain saw typically retails for around $1,500. nicméně, prices may vary depending on the retailer, umístění, a další faktory. Pokud se chcete dozvědět více podrobností, můžete hledat na oficiální webové stránky.

Kde najít Stihl MS 661 C-M for sale?

There are a few ways that you can find the Stihl MS 661 C-M for sale. You can either go to a Stihl dealer or you can find it online. If you go to a Stihl dealer, they will more than likely have it in stock. If you cannot find it at a Stihl dealer, then your next best option would be to look online. You can find it online through different retailers or even through online auctions.

Má MS 661 C-M come with a case?

Stihl čs 661 C-M is a gas-powered chain saw that comes with a case. nicméně, there have been reports of the case breaking. If you are planning on purchasing the saw, it is important to ensure that you purchase a case that will fit the saw properly. dodatečně, make sure that the saw has enough fuel to last during use.

Stihl čs 661 CM: Guidance and Instructions

Jak seřídit karburátor na MS 661 CM?

Stihl čs 661 C-M carburetor can be adjusted to fine tune the performance of the engine. There are a few different ways to adjust the carburetor on this mower. Follow these instructions to adjust the carburetor:

1. Locate and remove the fuel tank cap and unscrew the filler neck.
2. Remove the air filter cover by gently prying it off with a flat head screwdriver.
3. Be careful not to lose screws or other pieces while doing this!
4. Slide the carburetor bowl off of the engine block. The bowl should still be attached to one end of the throttle slide by a small spring clip.
5. Inspect both jets and make sure they are clean and free of debris. Be sure to replace jets if they become clogged or if your mower doesn’t run as well as it should now that you have cleaned everything up!
6. Tighten them until they just start.

Jak vyměnit barové olejové čerpadlo pro Stihl MS 661 CM?

1. Draining the oil tank. Before you start working on the bar oil pump, you need to drain the oil tank. Udělat toto, remove the oil cap and unscrew the oil hose from the pump. Pak, let the oil drain out completely.
2. Accessing the bar oil pump. To access the bar oil pump, you need to remove the sprocket cover and the bar. Once the cover and bar are removed, you will be able to see the pump.
3. Replacing the bar oil pump. K výměně olejového čerpadla baru, simply remove the old pump and install the new one in its place. Make sure that the new pump is properly seated and that all the connections are tight.
4. Refilling the oil tank. Once the new pump is installed, you can now refill the oil tank. Screw the oil hose back into the pump and then replace the oil cap.

Jak nastavit napínák řetězu na Stihl MS 661 CM?

Pokud váš Stihl čs 661 C-M chainsaw is producing too much vibration, it may be due to the chain tensioner. The tensioner is a small, metal piece located at the front of the saw near the cutting chain.

K nastavení napínáku, first loosen the two screws that hold it in place. Pak, use a flathead screwdriver to turn the tensioner clockwise or counterclockwise until the desired tension is achieved. Konečně, retighten the screws and test the saw to see if the vibration has been reduced.

What fuel mix to use for the Stihl MS 661 CM?

When using gasoline with this chainsaw, it’s important to use a fuel mixture that is designed specifically for this type of equipment. Obecně, a mixture that is between 9 a 11% ethanol will work well with the MS 661 CM. This mixture will provide plenty of power while also being easy on the engine.

If you’re planning on using diesel with your MS 661 CM, be sure to use a fuel blend that is specifically made for chain saws. A blend that is between 5 a 7% diesel should work well in this case. This mixture will provide plenty of power while also being relatively safe for the engine.

Stihl čs 661 CM: Odstraňování problémů

1. Stihl 661 CM: Suddenly stop while cutting

If you’re using a Stihl MS 661 C-M chainsaw and it suddenly stops while you’re cutting, there are a few potential causes.

1. První, check the chain to make sure it’s not damaged or dull. If the chain is damaged or dull, it can cause the saw to stop abruptly.
2. Druhý, zkontrolujte palivovou směs. If the fuel mix is too lean, it can cause the engine to stall. Třetí, zkontrolujte vzduchový filtr. Pokud je vzduchový filtr znečištěný, it can restrict air flow to the engine and cause it to stall.
3. Konečně, make sure the spark plug is clean and gap is set correctly. If the spark plug is fouled or the gap is incorrect, it can cause the engine to misfire and stall.

2. Stihl 661 CM: Motor postupně ztrácí výkon

The engine of your Stihl MS C-M might lose power gradually. This can be caused by a number of things, but the most common cause is that the engine’s oil has become dirty. If this is the case, you’ll need to take some simple steps to clean the engine and restore its power.

To clean the engine, start by draining any excess oil from the crankcase using a suitable container. další, use a degreaser to remove all of the dirt and grime from inside the engine. Konečně, fill up the crankcase with fresh oil and replace any parts that were damaged in the cleaning process.

3. Stihl 661 CM: Řetěz bývá uvolněný

There seems to be an issue with the chain on the MS 661 C-M pruner. It tends to be loose and require a lot of force to move the chain up and down. This can lead to problems such as missed cuts, which can be quite frustrating. The good news is that there are easy solutions for fixing this problem. Tady jsou 3 tips to resolving your MS C-M chain issues:

1. Inspect the connection between the chain and the sprocket: If the connection between the chain and sprocket is loose, it will cause difficulty in moving the chain up and down. Chcete-li to opravit, you will need to tighten up the connection with a wrench. Make sure not to overdo it, though – too much torque could damage your tool.
2. Check if there’s debris or sand blocking the sprocket: If there’s debris or sand blocking the sprocket, it will also cause difficulty in moving the chain up and down. To clear out any obstructions, you will need to use a wire brush or an angle grinder. Be very careful not to damage your tool in the process!
3. Check if there’s excess oil on the chainsaw: If there’s excess oil on the chainsaw, it will also cause difficulty in moving the chain up and down. Clean off any excess oil with a damp cloth before trying again to move the chain up and down. Make sure you do this after every use.

Závěr

Pokud hledáte výkonnou a spolehlivou motorovou pilu, Stihl MS 661 C-M je skvělá volba. nicméně, jako každá motorová pila, it’s not without its possible problems. naštěstí, there are solutions to all of these problems. With a little bit of knowledge and some basic tools, můžete si ponechat svůj Stihl MS 661 C-M running like new.